COPPER CABLE TROUBLESHOOTING AND CONNECTIVITY
MicroScanner ™ Cable Verifier Series
MicroScanner™ PoE
• PoE Switch Verification - Determine if a switch port can provide enough power by reporting PoE class (0-8) • Powered Pairs - Graphically identifies powered pairs. Including Dual Signature where the switch port delivers power on 2 or 4 pairs (802.3bt or PoE ++) • Active Switch Detection -
• Straightforward Interface - Graphical wiremap, length, cable ID, and distance to fault displayed on one screen • Multimedia Support - Tests all common media types including RJ11, RJ45, Coax(MS2 only), with no need for adapters • IntelliTone Toning - Trace virtually any cable or wire pair with IntelliTone digital and analog toning • VDV Service Detection - Verifies
Determine if a cable is connected to a switch port and port speed up to 10G • Cable Testing - Identify any shorted, open or crossed wires at both ends, length ofeach pair, and send tones to find cables. • Validate and troubleshoot your Industrial Ethernet copper cabling • PoE Injector verification - Display injector voltage level • IE model tests common connector types including RJ11, RJ45, Coax, and Industrial Ethernet connector types (M12X, M12D, an M8D) Search for: MS-POE, MS-POE-IE, MS-POE-KIT
today’s media services, including 10/100/1000
Ethernet, POTS, and PoE • Oversized Display - Large, backlit LCD makes results crystal clear whether in bright sunshine or a dark closet Search for: MS2-100, MS2-KIT
MicroScanner™ PoE Industrial Ethernet Professional Kit • Perform Cable Testing on Industrial Ethernet Networks (including Ethernet/IP, Profinet, EtherCat based systems) • Display cable length, wiremap and distance to fault • Display network switch speeds up to 10G and PoE • Locate and trace cable with IntelliTone(TM) and Remote ID set • Report PoE class (0-8) Search for: MS-POE, MS-POE-IE, MS-POE-KIT, MS-POE-IE-KIT
www.flukenetworks.com
Fluke Networks
197
Made with FlippingBook Learn more on our blog