156
BATTERY SERVICE
BOOSTER PAC
BOOSTER PAC
600 Peak Amp Jumper
#ES2500C • 900 peak amps. • 17 ampere per hour. • 23” cables (#4 gauge). • Good entry level unit. • Approved for use in all 50 states. • Power Cord #ESA214 (most units)
#ES5000C • 1600 peak amps. • 22 ampere per hour. • 43” cables (#4 gauge). • Approved for use in all 50 states. • Power Cord #ESA218 (most units)
#W16751 • VOLTAGE-SMART SAFETY CLAMPS - Auto shut-off • LED indicator detects if clamps are connected correctl • Non-sparking technology • USB port to recharge your smart phone or tablet on the go • Specs: 15V 1A Input; 12V, 5V @ 2.1A & 1A Outputs; 11100Mah Capacity; 6 hour Charging Time; 300 AMP Starting Current; 600 AMP Peak Current
HEAVY DUTY
STANDARD
BATTERY TESTER
BATTERY TESTER WITH PRINTER
#PBT300 • Expanded measurement range from 100-1400 CCA. • Green and red LEDs give fast decision on starter and electrical system testing. • High/low voltage capture for improved starter/charging system testing. • Same proven conductance technology and test algorithms required for warranty
#BA327 Offers a complete testing solution for 6 and 12 Volt batteries and 12 and 24 Volt charging systems. The tester’s integrated printer provides easy service documentation. It features easy, intuitive operation with quick, accurate
assessment of battery condition and starting and charging system
performance. • 6 and 12 Volt battery testing. • 1.5-30V Operating range. • 40-2000 CCA Testing capacity. • Integrated printer. • Extra-long 10’ leads. • Backlit screen for clear viewing in low light.
testing at automotive dealers. • Tests discharged batteries. • Voltmeter mode for testing both the starter and the charging system.
#1852 • 100 amp load. • Tests batteries to 1000 cold cranking amps. • Tests battery, charging system and starting system. 100 AMP BATTERY TESTER
#BA7 • Features an operating range of 7-15V and the capacity to test batteries rated between 100-1200 CCA. It adds the convenience of starting and charging system testing and offers quick assessment, providing both a numerical result and a pass/fail LED result. BATTERY & SYSTEM TESTER
VEHICLE MEMORY SAVER CONNECTION
#ESA30 • Interface connector between a jump starter and vehicle’s OBD II port. • Turns any jump starter with a 12V power port into a memory saver. This cost effective connector eliminates the need to purchase another type of expensive tool! • With jump starter, preserves vehicle codes and electronic presets. • OBD II connection is always on, unlike vehicle 12V power ports.
• Color coded, full-size meter provides accurate readings.
• Small, portable, pocket-sized. • Tests multiple battery types. • Bright 4 digit LED light display. • Reverse polarity & over-voltage protection.
FOR USE WITH BOOSTER PAKS
YOUR TRUSTED PARTNER | AT YOUR SERVICE SINCE 1984
Made with FlippingBook - Online magazine maker