168
FUEL FILTER SERVICE
#34900 • Removes and installs the original equipment 6 flute water sensor primarily located on the fuel filter on 2012 and newer 6.6L Duramax diesel engines. • For use when replacing the fuel filter (#LFF6012 ) or when servicing the water sensor (#6012SEN ). • Also fits DODGE Truck (8) 6.7L 13-15 Water Sensor. WATER SENSOR WRENCH
WATER SENSOR WRENCH
#904-111 • Removes and installs the 8 & 12 flute water sensors primarily found on GMC (8) 6.6L Diesel 01-11. • Use when replacing the fuel filter (Service Champ #LFF6012) or when servicing the water sensor (#8736SEN ). Be careful not to over tighten plastic threads. • Plastic sensor has an 8 or 12 sided design that is easily damaged by tools, like pliers, that do not specifically fit the sensor.
BEST SELLER
#61140 • Wrench Is Used to Remove and Install Fuel Filter Elements on 3.2L Diesel Ford Transit Engines. • Works on 2015 to current 150, 250, and 350 models. • Notched to match the canister design to help eliminate slipping Ford Transit Diesel Filter Wrench
#46363 • For GMC (8) 5.3L Flex-Fuel 02-04. • Due to limited clearance, this tool is a must to disconnect fuel filter from fuel rail. • Used with Service Champ fuel filter #GF847 , Warner #G6847 . GMC FUEL FILTER TOOL
and damage to the canister. • Has a 3/8” square drive to provide extra leverage.
#3526 • Design allows for easy removal and installation of Ford 7.3L diesel fuel filter caps and other diesel filter systems using the same configuration. • Works with fuel filter caps from 1995 -2002 (Service Champ #54070 and #54074 ). • Improves ability to remove and install caps where access is a problem. FORD TRUCK FUEL FILTER CAP TOOL
DISCONNECT SET
#37000 • Set of six tools which disconnect the spring lock couplings on Ford and Chrysler air conditioning lines. • Also works on fuel line quick connect couplings found on GM, Ford and Chrysler. • Set includes six sizes: 5/16’’, 3/8’’, 1/2’’, 5/8’’, 3/4’’ and 7/8’’.
HOSE PUSH OFF PLIERS
LOW PROFILE QUICK DISCONNECT SET
#8810 • Easy removal of rubber hoses from pressed on fittings for 3/16” to 1/2” OD hose fittings. • Ribbed surface digs into steel tube for added grip to push off rubber hose.
#3530 • Fuel line quick disconnect tools for hard-to-reach areas. • Flexible plastic design allows for easy application over tubing to access disconnects. • Sizes include: 7/8’’ (22mm)
3/8’’ (9mm) 7/16’’ (8mm)
3/4’’ (19mm) 5/8’’ (16mm)
YOUR TRUSTED PARTNER | AT YOUR SERVICE SINCE 1984
Made with FlippingBook - Online magazine maker