202
SPECIALTY TOOLS
BEST VALUE
BLOW GUNS
#S153 • 1/4” female NPT inlet - 1/8” female NPT outlet.
#18-603 • Adjustable air pressure knob • Non-slip knurled grip • Convenient pocket clip • 1/4” I/M Plug
#18-215 • Rubber tip to protect paint and finishes from scratching • 1/4” NPT female • Working pressure of 150 psi • Safety nozzle for limiting pressure to 30 psi
• Oil resistant, soft rubber tip. • Provides leak proof seal for blowing out lines.
BEST SELLER
#18-325 • Insulated fiberglass reinforced nylon grip • Contoured handle for better control • 4” long barrel angled at 15 degrees • Brass air flow valve
#18-611 • Durable lightweight ergonomic design fits comfortably in the hand for fatigue free use • 88% more air flow than a standard blowgun provides the air volume you need to work quickly • 1/4 inch female NPT threads (plug sold separately) • Designed for use at pressures up to 90 PSI
IMPACT DRIVER
WINDSHIELD SPRAY NOZZLE NEEDLE
#4608 • Loosen hard-to-turn screws, bolts or nuts. • Handle design prevents possibility of hitting hand with hammer when striking impact driver. • Bit holder has 3/8” drive and 5/16” hex for Phillips and flat screwdriver bits. • Includes eight screwdriver bits:
#4658 • Makes quick work of clearing obstructions from the windshield washer spray nozzle. • Easily pierces corrosion or remove blockage. • The barrel is knurled for grip and control. • Threaded end caps keep the needle points covered when not in use. • The pocket clip keeps the tool handy.
-No. 2 Phillips bit, 1-3/8” long with 5/16” hex -No. 2 Phillips bit, 3-1/8” long with 5/16” hex -No. 3 Phillips bit, 1-3/8” long with 5/16” hex -No. 3 Phillips bit, 3-1/8” long with 5/16” hex -5/16” wide x 1-3/8” long with 5/16” hex slotted bit -5/16” wide x 3-1/8” long with 5/16” hex slotted bit -3/8” wide x 1-3/8” long with 5/16” hex slotted bit -3/8” wide x 3-1/8” long with 5/16” hex slotted bit
WIRE SCRATCH BRUSH
#9999 • The flexible shaft and no-slip grip make installing clamps in hard to reach spaces faster and easier. • The 2-in-1 socket fits mini 1/4’’ and standard 5/16’’ hose clamp screw heads. #8888 • Set of 3 replacement sockets for #9999 Hose Clamp Driver. FLEXIBLE HOSE CLAMP DRIVER
O-RING TOOL & LIP SEAL PULLER
#2310 • Curved Handle Wire Scratch Brush • Clean carbon, dirt and paint from metal and other surfaces with this wooden-handle brush. • Overall length: approximately 14”.
#2554 • Tips are angled for hard-to-reach areas typically found around brakes, air conditioning and transmissions.
• Bristle area 3 x 19 rows, 1-1/8” trim & 6” long. • Great for cleaning battery terminals.
BEST SELLER
YOUR TRUSTED PARTNER | AT YOUR SERVICE SINCE 1984
Made with FlippingBook - Online magazine maker