Bunzl Safety_Hardware

2017 EDITION HARDWARE

Grade 80 Lifting Chain & Fittings SHACKLES

• Never modify, repair or reshape a shackle by welding, heating or bending as this will affect the Working Load Limit • Never use a safety bolt type shackle without using the split cotter pin.

Shackles should be inspected before use to ensure that:

Shackles are used in lifting and static systems as removable links to connect (steel) wire rope, chain and other fittings. • Screw pin shackles are commonly used for non- permanent applications. • Safety pin shackles are used for long-term or permanent applications or where the load may slide on the pin, causing rotation of the pin. • Dee shackles are typically used on one-leg systems whereas Bow shackles are mainly used on multi-leg systems.

Contents

• All markings are legible

• The threads of the pin and the body are undamaged • The body and the pin are not distorted or unduly worn • The body and pin are free from nicks, gouges, cracks and corrosion • The shackle is not to be heat treated as this may affect their Working Load Limit

// Shackles Overview

// Colour Coded Grade 'S' Screw Pin Bow Shackles

// Colour Coded Grade 'S' Safety Pin Bow Shackles

7-8

Yellow Pin Grade 'S' Shackles

// Yellow Pin Grade 'S' Safety Pin Shackles

Offshore Lifting Shackles

11-12 //

Grade 'M' Shackles

13-14 //

Commercial Grade Shackles

// Rigging Screws & Turnbuckles

Rigging Screws

Stub Turnbuckles

Super Buckles

Commercial Turnbuckles

// Eye Bolts & Nuts

18-20 //

Lifting Eye Bolts - Collared

20-21 //

Lifting Eye Bolts - Shouldered

// Links, Hooks & Swivels

Chain Split Links

Snap Hooks, Quick Links

Mooring Swivels

// Lifting and Lashing Points

// Grade 100 Weld-on Lifting and Lashing Rings

26-39 //

RUD Lifting Points, Load Rings, Eye Bolts & Nuts

40-45 //

Weld-on Load Rings & Lifting Points

2 | EMAIL info@bunzlsafety.com.au | bunzlsafety.com.au | CALL 1300 977 577

CALL 1300 977 577 | bunzlsafety.com.au | EMAIL info@bunzlsafety.com.au | 3

Grade ‘S’ Shackles

Colour Coded Grade ‘S’ Screw Pin Bow Shackles

Capacities: Screw Pin: 1 to 12 tonne; Safety Pin: 2 to 8.5 tonne

Our Grade S Shackles are a rated shackle that meet the requirement of AS 2741. Grade S Shackles are the most common shackles used in lifting applications, with a high strength to size ratio

Beaver Colour Coded Shackles take the guesswork out of choosing the right capacity when matching lifting components. Colour coding to international lifting standards.

• Available in both Dee and Bow configurations

Screw Pin Bow Shackles Grade ‘S’ to AS 2741

• Available in both Screw Pin and Safety Pin type – see drawing A and B for more information

Approx Weight (kg)

UOM Pack Qty

Product Code

Size (mm)

WLL (t)

Type Shape Closing Method

Shackle Colour

DIA d (mm)

Pin DIA D (mm)

Inside Width W (mm)

Inside Length L (mm)

Width of Bow B (mm)

DIA Boss F (mm)

• Because the pin holds more load than the body, the pin diameter is larger than the body diameter

• For the same W.L.L, they are smaller than grade M

242310M 10 x 11 1.00 Grade S Bow Screw Violet 242313M 13 x 16 2.00 Grade S Bow Screw Green 242316M 16 x 19 3.20 Grade S Bow Screw Yellow 242319M 19 x 22 4.70 Grade S Bow Screw Grey 242322M 22 x 25 6.50 Grade S Bow Screw Brown 242325M 25 x 29 8.50 Grade S Bow Screw Blue

Each 180 Each 75 Each 35 Each 20 Each 15 Each 10

• Our Grade S Shackles come in two colour configurations: - Beaver Standard Grade S: Yellow pin - Beaver Colour Coded Grade S: Body and pin colour coded to AS 2741, for easy match to components Grade

10 11 17 37 26 13 16 21 48 33 16 19 27 61 43 19 22 32 72 51 22 25 37 84 58 25 29 43 95 68

25 0.15 33 0.37 40 0.65 48 1.06 54 1.56 60 2.32 76 4.51

• The Body ID and date of Manufacture = the Batch ID.

Working Load limit

Date of Manufacturing

Each 5

242332M 32 x 35 12.00 Grade S Bow Screw Orange 32 35 52 119 83

Grade

Body ID.

Working Load limit

Date of Manufacturing

Working Load limit

Date of Manufacturing

Body ID.

Detail A Screw Pin Detail A Screw Pi

etail B fety Pin

Detail B Safety Pin

Detail A Screw Pin

4 | EMAIL info@bunzlsafety.com.au | bunzlsafety.com.au | CALL 1300 977 577

CALL 1300 977 577 | bunzlsafety.com.au | EMAIL info@bunzlsafety.com.au | 5

Colour Coded Grade ‘S’ Safety Pin Bow Shackles

Yellow Pin Grade ‘S’ Shackles

Safety Pin Bow Shackles Grade ‘S’ to AS 2741

Yellow Pin Grade ‘S’ Screw Pin Shackles to AS2741 Chain Dee Type – Capacities 0.5 - 35 tonne

UOM Pack Qty

Product Code

Size (mm)

WLL (t)

Type Shape Closing Method

Shackle Colour

DIA d (mm)

Pin DIA D (mm)

Inside Width W (mm)

Inside Length L (mm)

Width of Bow B (mm)

DIA Boss F (mm)

Approx Weight (kg)

Product Code

Size (mm)

WLL (t)

Type Shape Closing Method

DIA d (mm)

DIA PIN D (mm)

Inside Width W (mm)

Inside Length L (mm)

DIA Boss F (mm)

Approx Weight (kg)

UOM Pack Qty

Each 50 Each 30 Each 20 Each 12 Each 10

244313M 13 x 16 2.00 Grade S Bow Safety Pin Green 244316M 16 x 19 3.20 Grade S Bow Safety Pin Yellow 244319M 19 x 22 4.70 Grade S Bow Safety Pin Grey 244322M 22 x 25 6.50 Grade S Bow Safety Pin Brown 244325M 25 x 29 8.50 Grade S Bow Safety Pin Blue

13 16 21 48 33 33 0.44 16 19 27 61 43 40 0.79 19 22 32 72 51 48 1.26 22 25 37 84 58 54 1.88 25 29 43 95 68 60 2.78

241306 6 x 8 0.50 Grade S Dee Screw 6 8 12 22 241308 8 x 10 0.75 Grade S Dee Screw 8 10 13 26 241310 10 x 11 1.00 Grade S Dee Screw 10 11 17 32 241311 11 x 13 1.50 Grade S Dee Screw 11 13 18 37 241313 13 x 16 2.00 Grade S Dee Screw 13 16 21 41 241316 16 x 19 3.20 Grade S Dee Screw 16 19 27 51 241319 19 x 22 4.70 Grade S Dee Screw 19 22 32 60 241322 22 x 25 6.50 Grade S Dee Screw 22 25 37 71 241325 25 x 29 8.50 Grade S Dee Screw 25 29 43 81 241329 29 x 32 9.50 Grade S Dee Screw 29 32 46 90 241332 32 x 35 12.00 Grade S Dee Screw 32 35 52 100 76 241335 35 x 38 13.50 Grade S Dee Screw 35 38 57 113 84 241338 38 x 41 17.00 Grade S Dee Screw 38 41 60 124 92 17 21 25 27 33 40 48 54 60 67

0.06 Each 500 0.11 Each 300 0.15 Each 200 0.21 Each 100 0.37 Each 80 0.65 Each 40 1.06 Each 20 1.56 Each 15 2.32 Each 10 3.28 Each 8 4.51 Each 5 5.43 Each 4

7.89 Each 3 241344 44 x 51 25.00 Grade S Dee Screw 44 51 73 146 110 13.4 Each 2 241351 51 x 57 35.00 Grade S Dee Screw 51 57 83 171 127 18.85 Each 1

6 | EMAIL info@bunzlsafety.com.au | bunzlsafety.com.au | CALL 1300 977 577

CALL 1300 977 577 | bunzlsafety.com.au | EMAIL info@bunzlsafety.com.au | 7

Yellow Pin Grade ‘S’ Safety Pin Shackles

Yellow Pin Grade ‘S’ Screw Pin Shackles to AS2741 Anchor Bow Type – Capacities 0.33 - 55 tonne

Yellow Pin Grade ‘S’ Safety Pin Shackles to AS2741 Dee Type – Capacities 2.0 - 13.5 tonne

Product Code

Size (mm)

WLL (t)

Type Shape Closing Method

DIA d (mm)

DIA PIN D (mm)

Inside Width W (mm)

Inside Length L (mm)

Width of Bow B (mm)

DIA Boss F (mm)

Approx Weight (kg)

UOM Pack Qty

Product Code

Size (mm)

WLL (t)

Type Shape Closing Method

DIA d (mm)

DIA PIN D (mm)

Inside Width W (mm)

Inside Length L (mm)

DIA Boss F (mm)

Approx Weight (kg)

UOM Pack Qty

242305 5 x 6 0.33 Grade S Bow Screw 5 6 10 242306 6 x 8 0.5 Grade S Bow Screw 6 8 12 242308 8 x 10 0.75 Grade S Bow Screw 8 10 13 242310 10 x 11 1 Grade S Bow Screw 10 11 17 242311 11 x 13 1.5 Grade S Bow Screw 11 13 18 242313 13 x 16 2 Grade S Bow Screw 13 16 21 242316 16 x 19 3.2 Grade S Bow Screw 16 19 27 242319 19 x 22 4.7 Grade S Bow Screw 19 22 32 242322 22 x 25 6.5 Grade S Bow Screw 22 25 37 242325 25 x 29 8.5 Grade S Bow Screw 25 29 43 242329 29 x 32 9.5 Grade S Bow Screw 29 32 46 242332 32 x 35 12 Grade S Bow Screw 32 35 52 242335 35 x 38 13.5 Grade S Bow Screw 35 38 57 242338 38 x 41 17 Grade S Bow Screw 38 41 60 242344 44 x 51 25 Grade S Bow Screw 44 51 73 242351 51 x 57 35 Grade S Bow Screw 51 57 83

22 29 31 37 43 48 61 72 84 95

15 20 21 26 29 33 43 51 58 68

14 0.02 Each 740 17 0.06 Each 700 21 0.11 Each 25 25 0.15 Each 180 27 0.21 Each 100 33 0.37 Each 75 40 0.65 Each 35 48 1.06 Each 20 54 1.56 Each 15 60 2.32 Each 10 67 3.28 Each 6 76 4.51 Each 5 84 5.43 Each 3 92 7.89 Each 3

243313 13 x 16 2.00 Grade S Dee Safety Pin 13 16 21 243316 16 x 19 3.20 Grade S Dee Safety Pin 16 19 27 243319 19 x 22 4.70 Grade S Dee Safety Pin 19 22 32 243322 22 x 25 6.50 Grade S Dee Safety Pin 22 25 37 243325 25 x 29 8.50 Grade S Dee Safety Pin 25 29 43 243329 29 x 32 9.50 Grade S Dee Safety Pin 29 32 46 243332 32 x 35 12.00 Grade S Dee Safety Pin 32 35 52

41 51 60 71 81 90

33 0.44 Each 60 40 0.79 Each 35 48 1.26 Each 20 54 1.88 Each 12 60 2.78 Each 10 67 3.87 Each 8 76 5.26 Each 4

100

108 74 119 83 133 92 146 98

Yellow Pin Grade ‘S’ Safety Pin Shackles to AS2741 Anchor Bow Type - Capacities 2.0 - 55 tonne

178 127 110 13.40 Each 2

Product Code

Size (mm)

WLL (t)

Type Shape Closing Method

DIA d (mm)

DIA PIN D (mm)

Inside Width W (mm)

Inside Length L (mm)

Width of Bow B (mm)

DIA Boss F (mm)

Approx Weight (kg)

UOM Pack Qty

197 146 127 18.85 Each 1 242363 63 x 70 55 Grade S Bow Screw 63 70 105 267 184 152 37.86 Each 1

244313 13 x 16 2.00 Grade S Bow Safety Pin 13 16 21 48 244316 16 x 19 3.20 Grade S Bow Safety Pin 16 19 27 61 244319 19 x 22 4.70 Grade S Bow Safety Pin 19 22 32 72 244322 22 x 25 6.50 Grade S Bow Safety Pin 22 25 37 84 244325 25 x 29 8.50 Grade S Bow Safety Pin 25 29 43 95

33 33 0.44 Each 50 43 40 0.79 Each 30 51 48 1.26 Each 20 58 54 1.88 Each 12

68 60 2.78 Each 10 244329 29 x 32 9.50 Grade S Bow Safety Pin 29 32 46 108 74 67 3.87 Each 6 244332 32 x 35 12.00 Grade S Bow Safety Pin 32 35 52 119 83 76 5.26 Each 4 244335 35 x 38 13.50 Grade S Bow Safety Pin 35 38 57 133 92 84 6.94 Each 4 244338 38 x 41 17.00 Grade S Bow Safety Pin 38 41 60 146 98 92 8.79 Each 2 244345 45 x 51 25.00 Grade S Bow Safety Pin 44 51 73 178 127 110 14.99 Each 1 244351 51 x 57 35.00 Grade S Bow Safety Pin 51 57 83 197 146 127 20.65 Each 1 244363 63 x 70 55.00 Grade S Bow Safety Pin 63 70 105 267 184 152 41.05 Each 1

Dee Shackle

Bow Shackle

8 | EMAIL info@bunzlsafety.com.au | bunzlsafety.com.au | CALL 1300 977 577

CALL 1300 977 577 | bunzlsafety.com.au | EMAIL info@bunzlsafety.com.au | 9

Offshore Lifting Shackles (DNV Approved) Bow Type – Capacities 0.33-120 tonne Screw Pin #854 and Safety Pin #855 Standard: DNV 2.7-1 Type Approved , EN-13889 and U.S Fed. Spec. RR-C-271

Grade ‘M’ Shackles Beaver Grade M Shackles are a rated shackle that comply with the requirements of AS 2741. Grade M shackles are commonly used in marine applications. Grade

Date of Manufacturing

Working Load limit

• Only available in Dee configuration

• Screw Pin type only – please see drawing A for more information

Material: High Tensile Carbon Steel, Quenched and tempered, Grade 6

• Because the pin holds more load than the body, the pin diameter is larger than the body diameter

Body ID.

Finish: All parts hot dip galvanized, brown painted pins on top of galv.

• The Body ID and date of Manufacture = the Batch ID.

Safety factor: 6:1

Grade

Documentation: Test certificate and traceable rawmaterial / inspection certificate acc. EN-10204 - 3.1.

Sizes: 2-25 tonnes are supplied with DNV 2.7-1 Type Approval Certification.

Date of Manufacturing

Working Load limit

Temperature: -20°C to 200°C

Body ID.

Detail A Screw Pin

Grade ‘M’ Large Dee Shackles AS2741 Black - Capacities 0.5 - 20 tonne

UOM Pack Qty

Product Code

Size (mm)

WLL (t)

Type

Finish

Shape Closing Method

DIA d (mm)

DIA PIN D (mm)

Inside Width W (mm)

Inside Length L (mm)

DIA Boss F (mm)

Approx Weight (kg)

Screw Pin

Safety Bolt Pin

Product Code Screw Pin

Product Code Safety Bolt

WLL (t) 6:1

DIA Bolt d1 (mm)

DIA Body d (mm)

Inner Width a* (mm)

Inner length c* (mm)

Width of Bow e (mm)

Eye outer d2 (mm)

Screw Pin kgs/100 pcs

Safety Bolt kgs/100 pcs

230010 10 x 13 0.50 Grade M Self Colour Dee Screw 10 13 19 38 25 0.16 230013 13 x 16 0.75 Grade M Self Colour Dee Screw 13 16 28 54 32 0.35 230016 16 x 19 1.50 Grade M Self Colour Dee Screw 16 19 32 63 38 0.61 230020 19 x 22 2.00 Grade M Self Colour Dee Screw 19 22 38 73 44 1.10 230023 22 x 25 3.00 Grade M Self Colour Dee Screw 22 25 44 83 51 1.50 230025 25 x 29 3.80 Grade M Self Colour Dee Screw 25 29 51 95 57 2.14 230028 29 x 32 5.00 Grade M Self Colour Dee Screw 29 32 54 105 63 2.98 230032 32 x 35 6.00 Grade M Self Colour Dee Screw 32 35 60 114 70 3.10 230035 35 x 38 7.00 Grade M Self Colour Dee Screw 35 38 67 127 76 4.61 230038 38 x 44 9.50 Grade M Self Colour Dee Screw 38 44 70 137 89 8.01 Each 5 230042 41 x 48 11.00 Grade M Self Colour Dee Screw 41 48 76 146 95 10.48 Each 3 230045 44 x 51 13.00 Grade M Self Colour Dee Screw 44 51 83 156 102 12.65 Each 3 230050 51 x 57 16.00 Grade M Self Colour Dee Screw 51 57 98 114 114 18.50 Each 1 230056 57 x 63 20.00 Grade M Self Colour Dee Screw 57 63 108 210 127 28.00 Each 1 Detail A Screw Pin Each 200 Each 80 Each 50 Each 30 Each 25 Each 15 Each 10 Each 5 Each 5

A085405

0.33 6

5 6 8 9

10 12 13 16 18 21 27 31 37 43 46 52 57 60 74 83 95

22 29 32 36 43 47 60 71 84 95

16 20 21 26 29 33 42 51 58 68 74 83 89 98

13 2 16 6 20 11 22 15 26 21 33 37 40 65 47 110 50 150 58 220 64 310 72 420 74 600 84 800

A085406 A085506 0.5 8 A085408 A085508 0.75 10

13 17 25 42 70

A085409 A085509 1

A085411 A085511 1.5 13

11 13 16 19 22 25 28 32 35 38 45 50 57 65 75 89

A085413 A085513 2

A085416 A085516 3.25 19 A085419 A085519 4.75 22 A085422 A085522 6.5 25 A085425 A085525 8.5 28 A085428 A085528 9.5 32 A085432 A085532 12 35 A085435 A085535 13.5 38 A085438 A085538 17 42 A085445 A085545 25 50 A085452 A085552 35 57

120 170 250 340 480 700 900

108 119 132 146 178 197 222 255 330 380

127 105 1350 138 127 1900

1500 2100 2850

A085556 42.5 65

160 140

A085464 A085564 55 70

105 127 146

185 152 3800

- -

A085576 85 83 **A085589 120 95

190 165 235 203

- -

6200

11000

* Forging tolerance: +/- 5% on inside width/length. ** Safety factor 5:1

10 | EMAIL info@bunzlsafety.com.au | bunzlsafety.com.au | CALL 1300 977 577

CALL 1300 977 577 | bunzlsafety.com.au | EMAIL info@bunzlsafety.com.au | 11

Commercial Grade Shackles

Grade ‘M’ Grade Dee Shackles AS2741 Galvanised - Capacities 0.25 - 20 tonne

Commercial Grade Shackles are for general purpose use only and are available in both hot dipped galvanised and electro galvanised finishes. They are not produced to any standard. • Commercial Galvanised Shackles are available in both Dee and Bow type configuration • Commercial Electro Galvanised Shackles are available in Dee type configuration only

Product Code

Size (mm)

WLL (t)

Type Finish

Shape Closing Method

DIA d (mm)

DIA PIN D (mm)

Inside Width W (mm)

Inside Length L (mm)

DIA Boss F (mm)

Approx Weight (kg)

UOM Pack Qty

230306 6 x 10 0.25 Grade M Galvanised Dee Screw 6 10 13 25 19 0.061 Each 600 230310 10 x 13 0.50 Grade M Galvanised Dee Screw 10 13 19 38 25 0.16 Each 200 230313 13 x 16 0.75 Grade M Galvanised Dee Screw 13 16 28 54 32 0.35 Each 80 230316 16 x 19 1.50 Grade M Galvanised Dee Screw 16 19 32 63 38 0.61 Each 50 230320 19 x 22 2.00 Grade M Galvanised Dee Screw 19 22 38 73 44 1.10 Each 30 230323 22 x 25 3.00 Grade M Galvanised Dee Screw 22 25 44 83 51 1.50 Each 25 230325 25 x 29 3.80 Grade M Galvanised Dee Screw 25 29 51 95 57 2.14 Each 15 230328 29 x 32 5.00 Grade M Galvanised Dee Screw 29 32 54 105 63 2.98 Each 10 230332 32 x 35 6.00 Grade M Galvanised Dee Screw 32 35 60 114 70 3.10 Each 5 230335 35 x 38 7.00 Grade M Galvanised Dee Screw 35 38 67 127 76 4.61 Each 5 230338 38 x 44 9.50 Grade M Galvanised Dee Screw 38 44 70 137 89 8.01 Each 5 230342 41 x 48 11.00 Grade M Galvanised Dee Screw 41 48 76 146 95 10.48 Each 3

• Screw Pin type only

• Unlike other types of shackles, commercial shackles have the same diameter pin as the body

• Not suitable for lifting or towing.

Commercial Hot Dipped Galvanised Dee Shackle - Sizes 5mm - 25mm

Product Code

Size (mm)

Finish

Shape Closing Method

Approx Weight (kg)

UOM Pack Qty

200305 5 200306 6 200308 8 200310 10 200311 11 200313 13 200316 16 200320 20 200323 23 200325 25

Galvanised Dee Galvanised Dee Galvanised Dee Galvanised Dee Galvanised Dee Galvanised Dee Galvanised Dee Galvanised Dee Galvanised Dee Galvanised Dee

Screw 0.016 Each 500 Screw 0.025 Each 500 Screw 0.055 Each 200 Screw 0.120 Each 200 Screw 0.160 Each 150 Screw 0.230 Each 100 Screw 1.000 Each 30 Screw 1.300 Each 20 Screw 1.900 Each 15 Screw 0.5 Each 50

NOT TO BE USED FOR LIFTING

Commercial Hot Dipped Galvanised Bow Shackle - Sizes 5mm - 25mm

Product Code

Size (mm)

Finish

Shape Closing Method

Approx Weight (kg)

UOM Pack Qty

205305 5 205306 6 205308 8 205310 10 205311 11 205313 13 205316 16 205320 20 205323 23 205325 25

Galvanised Bow Screw 0.017 Each 500 Galvanised Bow Screw 0.027 Each 500 Galvanised Bow Screw 0.060 Each 200 Galvanised Bow Screw 0.130 Each 200 Galvanised Bow Screw 0.175 Each 150 Galvanised Bow Screw 0.250 Each 100 Galvanised Bow Screw 0.600 Each 50 Galvanised Bow Screw 1.100 Each 30 Galvanised Bow Screw 1.400 Each 20 Galvanised Bow Screw 2.000 Each 15

NOT TO BE USED FOR LIFTING

12 | EMAIL info@bunzlsafety.com.au | bunzlsafety.com.au | CALL 1300 977 577

CALL 1300 977 577 | bunzlsafety.com.au | EMAIL info@bunzlsafety.com.au | 13

RIGGING SCREWS & TURNBUCKLES

Commercial Electro Galvanised Dee Shackle - Sizes 5mm - 25mm

Product Code

Size (mm)

Finish

Shape Closing Method

Approx Weight (kg)

UOM Pack Qty

200205 5 200206 6 200208 8 200210 10 200211 11 200213 13 200216 16 200220 20 200223 23 200225 25

Electro Galvanised Dee Screw 0.015 Each 500

Rated Rigging Hardware Our range of Rigging Hardware complies with a number of different standards. Each product has a working load limit (W.L.L) and is rated for lifting applications. Our range of quality rigging hardware is manufactured from the finest milling techniques and designed for both heavy industry use and general hardware applications.

Electro Galvanised

Dee Screw 0.024 Each 500

Electro Galvanised Dee Screw 0.053 Each 200 Electro Galvanised Dee Screw 0.115 Each 200 Electro Galvanised Dee Screw 0.153 Each 150 Electro Galvanised Dee Screw 0.223 Each 100 Electro Galvanised Dee Screw 0.490 Each 50 Electro Galvanised Dee Screw 0.980 Each 30 Electro Galvanised Dee Screw 1.260 Each 20 Electro Galvanised Dee Screw 1.850 Each 15

Eye and Eye Rigging Screws BS4429 Tested Hot Dipped Galvanised Product Code Size (mm) e L (mm) D1 (mm) 327310 10 359 259 152 21 327313 13 465 369 229 25 327316 16 523 393 228 27 327320 20 563 413 229 34 327324 24 786 589 356 42 327333 33 830 645 381 51 327338 38 870 655 407 57 e OPEN e CLOSE Open (mm) e Close (mm)

D2 (mm)

D3 (mm)

G (mm)

H (mm)

WLL (t)

Pack Qty

Weight Per 100 (kg)

UOM

NOT TO BE USED FOR LIFTING

10 13 16 20 24 33 38

11 14 18 25 26 34 38

25 36 40 55 57 64 75

0.3 100 38 0.5 50 75 0.75 30 130 1.25 20 185 2.5 10 380

Each Each Each Each Each Each

11 14 17 20 25 27

5 6

5 3

680

1000 Each

Body Length = L

e OPEN e CLOSE

Eye

Body Length = L

Jaw and Jaw Rigging Screws with Locknuts BS4429 Tested Hot Dipped Galvanised Product Code Size (mm) e L (mm) D1 (mm) D2 (mm) D3 (mm) H

e Close (mm)

G (mm)

H (mm)

WLL (t)

Pack Qty

Weight Per 100 (kg)

UOM

Open (mm)

328310 10 349 235 152 21 328313 13 524 343 229 25 328316 16 550 361 229 27 328320 20 550 387 229 34 328324 24 822 556 356 42 328333 33 872 604 381 51 328338 38 949 670 407 57 328350 50 977 743 407 76

10 13 16 20 24 33 38 48

8 9

11 19 22 22 32 38 47 51

21 35 51 48 65 76 90

0.3 100 44 0.5 50 85 0.75 30 140 1.25 20 220 2.5 10 450

Each Each Each Each Each Each

e OPEN e CLOSE

13 16 22 24 33 42

5 6

5 640

10 1260 Each 5 2400 Each

121 10

Body Length = L

e OPEN e CLOSE

Body Length = L

Jaw

14 | EMAIL info@bunzlsafety.com.au | bunzlsafety.com.au | CALL 1300 977 577

CALL 1300 977 577 | bunzlsafety.com.au | EMAIL info@bunzlsafety.com.au | 15

Commercial Turnbuckles

Jaw and Eye Rigging Screws BS4429 Tested Hot Dipped Galvanised

e OPEN e CLOSE

The intended use of our commercial rigging hardware is for non-lifting applications, such as; guying and rigging of fences, pillars etc. In order to increase corrosion against the toughest environment, they are available in both hot dipped galvanised and zinc plated.

Product Code

Size (mm)

e Open (mm)

e Close (mm)

L (mm)

D1 (mm)

D2 (mm)

D3 (mm)

G (mm)

H (mm)

g (mm)

h (mm)

d3 (mm)

WLL (t)

Pack Qty

Weight Per

UOM

100 (kg)

e OPEN e CLOSE

329310 10 349 235 152 21 10 8 11 21 11 25 8 0.3 40 40 Each 329313 13 527 334 229 25 13 9 19 35 14 36 11 0.5 20 100 Each 329316 16 556 375 229 27 16 13 22 51 18 40 14 0.75 15 140 Each 329320 20 654 385 229 34 20 16 22 48 25 55 17 1.25 15 200 Each 329324 24 812 528 356 42 24 22 32 65 26 57 20 2.5 5 440 Each Body Length = L

Hook and Eye Commercial Turnbuckles - Cast Electro Galvanised

Product Code

Size (mm)

Pack Qty

Weight Per 100 (kg)

UOM

320205 5 320206 6 320208 8 320210 10

500 200 150 100

15 16 24 39

Each Each Each Each

Body Length = L

e OPEN e CLOSE

Eye and Eye Commercial Turnbuckles - Cast Electro Galvanised

Product Code

Size (mm)

Pack Qty

Weight Per 100 (kg)

UOM

Body Length = L

Eye

Jaw

321205 5 321206 6 321208 8 321210 10

500 200 150

15 16 24 39

Each Each Each Each

Stub Turnbuckles

H Forged Stub and Stub Heavy Duty Turnbuckles Dipped Galvanised Body and Black Stubs Ends to BS716 Product Code Chain Size (mm) e Open (mm) e Close (mm) L (mm) D (mm) h

Hook and Eye Commercial Turnbuckles - Forged Hot Dipped Galvanised

L1 (mm)

L2 (mm)

Pack Qty

Weight Per 100 (kg)

UOM

Product Code

Size (mm)

Pack Qty

Weight Per 100 (kg)

UOM

e OPEN e CLOSE

319013 13 319016 16 319020 20 319025 25 319032 32 319032 32

475 495 500 535 554 680

335 365 365 400 400 525

191 204 217 232 252 255

12 16 20 24 33 32

165.5 95.5

10 10

Each Each Each Each Each Each

323206 6 323208 8 323210 10 323213 13 323216 16 323220 20 323223 22 323225 25

250 150 100

Each Each Each Each Each Each Each Each

174

102

120 200 312 550

14 26 50

Body Length = L

187.5 108.5 8

40 25 15

205 200 260

116 126 135

4 2 3

100 168 246 256

461.76

8 8

Eye and Eye Commercial Turnbuckles - Forged Hot Dipped Galvanised

Product Code

Size (mm)

Pack Qty

Weight Per 100 (kg)

UOM

Stub

Super Buckles Super Buckles Jaw and Jaw with Lock Nuts. Federal Spec FF-T-791 Forged Hot Dipped Galvanised

324206 6 324208 8 324210 10 324213 13 324216 16 324220 20 324223 22 324225 25

250 150 100

Each Each Each Each Each Each Each Each

14 26 50

40 25 15

100 168 246 256

Product Code

Size (mm)

e Open (mm)

e Close (mm)

L (mm)

D2 (mm)

D3 (mm)

G (mm)

H (mm)

WLL (t)

Pack Qty

Weight Per

UOM

8 8

e OPEN e CLOSE

100 (kg)

Forged Stub and Stub Commercial Turnbuckles - Hot Dipped Galvanised Body and Black Stub End

322412 12 x 305 780 485 305 12.7 9.53 322416 16 x 305 676 459 229 15.88 12.70 21 322419 19 x 305 570 428 152 19.05 15.88 26 322422 22 x 305 873 580 305 22.23 19.05 26 322425 25 x 305 1221 777 457 25.4 22.23 31 Body Length = L 16

46 60 71 71 82

900 20 1500 10 2300 8 3200 5 4500 4

109 Each 177.5 Each 298 Each 371 Each 596.5 Each

Product Code

Size (mm)

Pack Qty

Weight Per 100 (kg)

UOM

325010 10 325013 13 325016 16 325020 20 325023 23 325025 25

100

26 50

Each Each Each Each Each Each

40 25 15

e OPEN e CLOSE e OPEN e CLOSE

100 168 246 256

8 8

Jaw

Body Length = L

16 | EMAIL info@bunzlsafety.com.au | bunzlsafety.com.au | CALL 1300 977 577

CALL 1300 977 577 | bunzlsafety.com.au | EMAIL info@bunzlsafety.com.au | 17

EYE BOLTS & NUTS

Lifting Collared Eye Bolts with B.S.W Thread BS529 Conforms to AS2317 - 1984.

Product Code

Size Inches

Finish

W (mm)

H1 (mm)

H2 (mm)

D1 (mm)

D2 (mm)

D3 (mm)

D4 (mm)

WLL (t)

Pack Qty

Weight Per 100 (kg)

UOM

VERTICAL LIFT ONLY PLAIN EYEBOLT IS ACCEPTABLE VERTICAL LIFT ONLY PLAIN EYEBOLT IS ACCEPTABLE

358010 3/8” 358013 1/2” 358016 5/8” 358019 3/4” 358022 7/8” 358025 1”

Self Colour 32 17 35 14 9.53

21 0.25 400 5.5

Each

Self Colour 41 22 42.5 19 12.70 11 28 0.4 150 14.6 Each Self Colour 52 28 58 24 15.88 14 36 0.8 60 30 Each Self Colour 62 33 69 28 19.05 17 43 1.6 40 52.5 Each

Lifting Eye Bolts - Collared

Self Colour 73 39 80.5 33 22.23 20 50 2

20 90

Each Each Each Each Each

Lifting Eyebolts And Eyenuts Our Lifting Eyebolts and Eyenuts come in a range of threads including BSW, UNC and Metric and are predominately used for lifting applications.

VERTICAL LIFT ONLY PLAIN EYEBOLT IS ACCEPTABLE

Self Colour 82 44 92 38 25.40 22 57 2.5 15 106

358028 1-1/8” Self Colour 92 50 103 42 28.58 25 64 3.5 10 160 358032 1-1/4” Self Colour 104 55 116 48 31.75 28 71 5 6 260 358038 1-1/2” Self Colour 123 67 137.5 57 38.10 33 85 7 4 350

A A

Eyebolts and Eyenuts both carry the markings as shown.

PLAIN OR COLLAR EYEBOLT PLAIN OR COLLAR EYEBOLT

PLAIN EYEBOLT PL IN EYEBOLT

It is recommended that all eyebolts used for lifting be of forged steel and be equipped with shoulders or collars. PLAIN OR COLLAR EYEBOLT

ANGULAR LIFTS COLLARED EYEBOLT ONLY ANGULAR LIFTS COLL RED EYEBOL ONLY

Lifting Eyebolts and Eyenuts

PLAIN EYEBOLT

VERTICAL LIFT ONLY PLAIN EYEBOLT IS ACCEPTABLE

ANGULAR LIFTS COLLARED EYEBOLT ONLY

60° 60°

90° 90°

M10

60°

90°

COLLARED EYEBOLT COLLARED EYEBOLT W L f r Cl A A

M10

WLL for Class 3 load application as specified by AS 1418, Part 1 LL for Class 3 loa a lication as specified by A 1418, Part 1 load pplication as specified y S 1418, Part 1 W L for Cla s 3 load a plication a spec fied by AS 1418, Part 1 WLL for Class 3 lo d appl cation as specified by AS 1418, Part 1 WLL for Class 3 load pplic tion a sp cified by AS 418, Part 1

A LLAR EYEBOLT ON Y COLLAR EYEBOLT ONLY

Lifting Collared Eye Bolts with UNC Thread BS529 Conforms to AS2317 - 1984.

COLLAR EYEBOLT ONLY tonnes tonnes tonnes to nes

tonnes

PLAIN OR COLLAR EYEBOLT

PLAIN EYEBOLT

COLLARED EYEBOLT

ANGULAR LIFTS COLLARED EYEBOLT ONLY The Australian Standard covering collared eyebolts is AS 2317-1984. section o "Care nd Us of Eyebolts" is taken from that andard. NB: Only use rated yebolt for fifting. 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 The Australian Standard covering collared eyebolts is AS 2317-1984. The section on "Care and Use of Eyebolts" is taken from that standard. NB: Only use rated eyebolts for fifting.

The Australian Standard covering collared eyebolts is AS 2317-1984. The section on "Care and Use of Eyebolts" is taken from that standard. NB: Only use rated eyebolts for fifting. WLL for Class 3 load application as specified by AS 1418, Part 1 WLL for Clas 3 load application as specified by AS 1418, Part 1 W L for Cla s 3 load a plication as specified by AS 1418, Part 1 W L for Class 3 load application as spec fied by AS 418, Part 1 WLL for Class 3 load pplication as sp cified by AS 1418, Part 1 WLL for Cl ss 3 load applic tion as specified by AS 1418, Part 1

Product Code

Size Inches

Finish

W (mm)

H1 (mm)

H2 (mm)

D1 (mm)

D2 (mm)

D3 (mm)

D4 (mm)

WLL (t)

Pack Qty

Weight Per 100 (kg)

UOM

2 Nominal size of eyebolt Nominal size of eyebolt o inal size of eyebolt

Nominal size of yebolt

60° Nominal size of eyebolt

Nominal size f eyebolt

90° WLL for Class 3 load application as specified by AS 1418, Part 1

360010 3/8” 360012 1/2” 360016 5/8” 360019 3/4” 360022 7/8” 360025 1”

Self Colour 33 9

36 15 9.53

22 0.25 400 6

Each Each Each Each Each Each Each Each Each Each

Single Eyebolt Single Eyebolt Single Eyebolt Single Eyebolt

Singl Eyebolt

Single Eyebolt

Pair of eyebolts (see note) Pair of eyebolts (see note) air of eyebolts (see note) Pair of yebolts (s e note) Pair of eyebolts (se note) Pair f eyebolts (se note)

M10

Self Colour 44 11 48 20 12.70 11 29 0.4 150 15 Self Colour 52 14 58 24 15.88 14 36 0.8 60 27 Self Colour 66 17 73 30 19.05 18 45 1.6 40 54

Nominal size of eyebolt

COLLAR EYEBOLT ONLY Trunnion-type mounting Axial Trunnion-type mounting Axial Trunnion-type ounting Axial Tru nion-type mounting Axial Tru ion-type mounting Single Eyebolt

Pair of eyebolts (see note)

Included angle 60° Included angle 60° Included angle 60°

Inclu ed angle 60°

Included angle 60° Included angle 60°

Included angle 60°

Included angle 90° Included angle 90° Included angle 90°

Inclu ed angle 90°

Included angle 90° Included angle 90° Inclu ed angle 90°

Axial Tru nion-type mou ting

Axial Trunnion-type mou ting

Perpendicular Perpen icular Included angle 30° Perpendicular Included angle 30° Perpendicular Included angle 30° Perpendicular Inclu ed angle 30° Perpendicular Included angle 30° Perpendicular Inclu ed angle 30° Included angle 30°

COLLARED EYEBOLT

Axial

Self Colour 77 20 84 35 22.23 21 52 2

40 85

Self Colour 85 22 94 39 25.40 23 58 2.5 25 113

The Australian Standard covering collared eyebolts is AS 2317-1984. The section on "Care and Use of Eyebolts" is taken from that standard. NB: Only use rated eyebolts for fifting.

360032 1-1/4” Self Colour 106 28 117 48 31.75 29 72 5 6 360038 1-1/2” Self Colour 118 33 131 54 38.10 32 81 7 6 360044 1-3/4” Self Colour 148 39 164 68 44.45 40 101 8 6

237 312 627 958

30°

60°

90°

30°

60°

90°

360050 2”

Self Colour 168 44 186 76 50.80 46 115 10 4

M12 M16 M20 M24 M30 M36 M42 M48 M56 M64 M72

12 16 20 24 30 36 42 48 56 64 72 M12 M16 M20 M24 M30 M36 M42 M48 M56 M64 M72

0.32 0.63 1.25 2.00 3.20 6.00 6.30 8.00 M12 M16 M20 M24 M30 M36 M42 M48 M56 M64 M72 12.00 16.00 20.00

M12 M16 M20 M 4 M 0 M3 M42 M4 M56 M 4 M72

0.32 0.63 1.25 2.00 3.20 6.00 6.30 8.00

0.32 0.63 1.25 2. 0 3.20 6. 0 6.30 8. 0

0.32 0.63 1.25 2.00 3.20 6.00 6.30 8.00

0.08 0.16 0.31 0.50 0.80 1.30 1.60 2.00 3.00 4.00 6.00 12.00 16.00 2 .00 0.32 0.63 1.25 2.0 3.2 6.00 6.30 8.00

0.08 0.16 0.31 0.50 0.80 1.30 1.60 2.00 3.00 4.00 6.00

0.08 0.16 0.31 0.50 0.80 1.30 1.60 2. 0 3. 0 4. 0 6. 0

.08 0.16 0.31

0.08 0.16 0.31

0.16 0.32 0.63 1.00 1.60 2.60 3.20 4.00 6.00 8.00 10.00

0.16 0.32 0.63 1. 0 1.60 2.60 3.20 4. 0 6. 0 8. 0 1 . 0

0.16 0.32 0.63 1.00 1.60 2.60 3.20 4.00 6.00 8.00 1 .00

0.40 0.79 1.60 2.50 4.00 6.30 7.90

0.40 0.79 1.60 2.50 4. 0 6.30 7.90

.40 0.79 1.60 2.50 4.00 6.30 7.90

0.26 0.50 1.00 1.60 2.60 4.00 5.00 6.40 9.60 0.2 0.5 1.00 1.6 2.60 4.00 5.00 6.40 9.60 13. 0 16. 0 13.00 16.00 2.60 4. 0 5. 0 6.40 9.60 0.26 0.50 1.0 1.60 2.60 4.0 5.00 6.40 9.60 13.00 16.00 .26 .50 . 0 .60

0.26 .50 1. 0 1.60 2.60 4. 0 5. 0 6.40 9.60

0.26 .50 1.00 1.60 2.60 4.00 5.00 6.40 9.60

0.26 .5 1.0

0.16 0.32 0.63 1.00 1.60 2.50 3.20 4.00 6.00 8.00 10.00 0. 0. 0. 1.

0.16 0.32 0.63 1.00 1.60 2.50 3.20 4. 0 6. 0 8.00 1 . 0

0.16 0.32 0.63 1.00 1.60 2.50 3.20 4.00 6.00 8.00 1 .00

M12 M16 M20 M24 M30 M36 M42 M48 M56 M64 M72

0.16 0.32 0.63 1.00 1.60 2.60 3.20 4.00 6.00 8.00

0.40 0.79 1.60 2.50 4.00 6.30 7.90

0.16 0.32 0.63 1.00 1.60 2.50 3.20 4.00 6.00 8.00 1.60 2.50 3.20 4. 0 6. 0 8.00 1 . 0

M12 M16 M20 M24 M30 M36 M42 M48 M56 M64 M72

0.32 0.63 1.25 2.00 3.20 6.00 6.30 8.00

0.08 0.16 0.31 0.50 0.80 1.30 1.60 2.00 3.00 4.00 6.00

0.16 0.32 0.63 1.00 1.60 2.60 3.20 4.00 6.00 8.00 10.00

0.40 0.79 1.60 2.50 4.00 6.30 7.90

0.16 0.32 0.63 1.00 1.60 2.50 3.20 4.00 6.00 8.00 10.00

.50 .80

1.60 2.60 4.00 5.00 6.40 9.60 13.00 16.0

1.30 1.60 2. 0 3. 0 4. 0 6. 0

1.30 1.60 2.00 3.00 4.00 6.00

10.00 15.00 20.00 25.00

1 . 0 15. 0 2 . 0 25. 0

1 .00 15.00 2 .00 25.00

10.00 15.00 20.00 25.00

12.00 16.00 20.00

12. 0 16. 0 2 . 0

12.00 16.00 2 .00

12.00 16.00 20.00

13. 0 16. 0

13.00 16.00

10.00

Reduction factor for single eyebolt Reduction factor for single eyebolt Reduction factor for single eyebolt eduction factor for singl eyebolt Reduction factor for single yebolt Reduction factor for singl eyebolt Redu ion factor for single eyebolt

0.25

0.63

0.40 0.40

0.25 0.25

0.25

0.63

0.40

.40

0.25

0.63

0.40

0.25

18 | EMAIL info@bunzlsafety.com.au | bunzlsafety.com.au | CALL 1300 977 577

CALL 1300 977 577 | bunzlsafety.com.au | EMAIL info@bunzlsafety.com.au | 19

Lifting Eye Nuts - Shouldered

Lifting Collared Eye Bolts with Metric Threads BS4278

Conforms to AS2317 - 1984.

Metric Shouldered Eye Nuts to DIN582 “Gold” Zinc Dichromate Finish

“Gold” Zinc Dichromate Finish

Product Code

Size (mm)

Finish

W (mm)

H1 (mm)

H2 (mm)

D1 (mm)

D2 (mm)

D3 (mm)

D4 (mm)

WLL (t)

Pack Qty

Weight Per 100 (kg)

UOM

Product Code

Size (mm)

Finish

W (mm)

H (mm)

D1 (mm)

D2 (mm)

D3 (mm)

D4 (mm)

WLL (t)

Pack Qty

Weight Per 100 (kg)

UOM

359008 8

Zinc Dichromate 33 18 36 15 8

18 22 0.15 400 6

Each Each Each Each Each Each Each Each

359208 8

Zinc Dichromate 36

36 45 52 61 70 80 90

20 25 30 35 40 45 50

0.14 400 5 0.23 180 9 0.34 110 16 0.7 80 24 1.2 50 36 1.5 30 58 1.8 20 72

Each Each Each Each Each Each Each

359010 10 Zinc Dichromate 33 18 36 15 10 18 22 0.25 180 6 359012 12 Zinc Dichromate 33 18 36 15 12 18 22 0.4 110 6 359016 16 Zinc Dichromate 44 23 48 20 16 24 29 0.8 80 15 359020 20 Zinc Dichromate 59 32 65 27 20 32 40 1.6 45 38 359022 22 Zinc Dichromate 64 35 73 30 22 34 45 1.6 30 54 359024 24 Zinc Dichromate 77 40 84 35 24 42 52 2.5 10 85 359030 30 Zinc Dichromate 96 51 106 44 30 52 65 4 4 162

359210 10 Zinc Dichromate 45 359212 12 Zinc Dichromate 54 359216 16 Zinc Dichromate 63 359220 20 Zinc Dichromate 72 359222 22 Zinc Dichromate 81 359224 24 Zinc Dichromate 90

10 12 16 20 22 24

10 12 14 16 18 20

Lifting Eye Bolts - Shouldered

Grade-80 Eye Bolts

Metric Shouldered Eye Bolts to DIN580 Conforms to AS2317 - 1984.

Stamped with WLL F2 Forged From High Tensile Alloy Steel. Hi-Visibility Powder Coated Finish. Long shanks and special thread forms made to order.

“Gold” Zinc Dichromate Finish

Product Code

Size (mm)

Finish

W (mm)

H1 (mm)

H2 (mm)

D1 (mm)

D2 (mm)

D3 (mm)

D4 (mm)

WLL (t)

Pack Qty

Weight Per 100 (kg)

UOM

Product Code

WLL F1 (t)

WLL F2 (t)

A (mm)

B (mm)

C (mm)

D (mm)

E (mm)

G (mm)

L (mm)

Net Weight (kg)

359108 8

Zinc Dichromate 36 13 36 20 8

20 0.14 400 6

Each Each Each Each Each Each Each Each Each

HTEB08 0.80 HTEB10 1.00 HTEB12 1.60 HTEB16 4.00 HTEB20 6.00 HTEB024 8.00

0.20 0.25 0.40 1.00 1.60 2.50

M08 M10 M12 M16 M20 M24

27 27 27 34 41 50

30 30 30 34 40 50

12 12 12 15 17 20

48 48 48 56 70 85

10 10 10 14 16 18

21 21 21 28 35 42

0.17 0.17 0.17 0.37 0.60 1.10

359110 10 Zinc Dichromate 45 17 45 25 10 10 25 0.23 180 11 359112 12 Zinc Dichromate 54 20.5 52 30 12 12 30 0.34 110 18 359116 16 Zinc Dichromate 63 27 61 35 16 14 35 0.7 80 28 359120 20 Zinc Dichromate 72 30 70 40 20 16 40 1.2 50 45 359122 22 Zinc Dichromate 81 35 80 45 22 18 45 1.5 30 67 359124 24 Zinc Dichromate 90 36 90 50 24 20 50 1.8 20 87 359130 30 Zinc Dichromate 108 45 110 60 30 24 65 3.6 4 166 359136 36 Zinc Dichromate 126 54 130 70 36 28 75 5.1 4 265

20 | EMAIL info@bunzlsafety.com.au | bunzlsafety.com.au | CALL 1300 977 577

CALL 1300 977 577 | bunzlsafety.com.au | EMAIL info@bunzlsafety.com.au | 21

LINKS, HOOKS & SWIVELS

Commercial Mooring Swivels Eye and Bow Type

Product Code

Size (mm)

Finish

Pack Qty

Weight Per 100 (kg)

UOM

330306 6 330308 8 330310 10 330313 13 330316 16 330320 20 330323 23 330325 25 330328 28

Galvanised Galvanised Galvanised Galvanised Galvanised Galvanised Galvanised Galvanised Galvanised

250 150

8.4

Each Each Each Each Each Each Each Each Each

16.2 27.8 48.3 85.0

Chain Split Links

80 35 25 12 10

Chain Split Links Electro Galvanised Product Code Size (mm)

134.1 200.0 315.0 640.0

5 5

Finish

Pack Qty

Weight Per 100 (kg)

UOM

420103 3.5 420105 5 420106 6 420108 8 420110 10 420113 13

Electro Galvanised 5000 Electro Galvanised 1500 Electro Galvanised 800 Electro Galvanised 400 Electro Galvanised 200 Electro Galvanised 120

0.41 1.72

Each Each Each Each Each Each

Beaver Commercial Chain Swivels Bow and Bow Type

6.9

12 23

Product Code

Size (mm)

Finish

Pack Qty

Weight Per 100 (kg)

UOM

Chain Split Links Hot Dipped Galvanised Product Code Size (mm) Finish

335306 6 335308 8 335310 10 335313 13 335316 16 335320 20 335323 23 335325 25

Galvanised Galvanised Galvanised Galvanised Galvanised Galvanised Galvanised Galvanised

250 150

6.0

Each Each Each Each Each Each Each Each

Pack Qty

Weight Per 100 (kg)

UOM

13.5 25.0 56.0

80 35 25 12 10

420303 3.5 420305 5 420306 6 420308 8 420310 10 420313 13

Galvanised Galvanised Galvanised Galvanised Galvanised Galvanised

5000 1500

0.41 1.72

Each Each Each Each Each Each

120.0 180.0 250.0 410.0

800 400 200 120

6.9

12 23

Snap Hooks, Quick Links

Snap Hooks

Product Code

Size (mm)

Finish

Pack Qty

Weight Per 100 (kg)

UOM

425204 4 425205 5 425206 6 425207 7 425208 8 425210 10

Electro Galvanised 2500 Electro Galvanised 1400 Electro Galvanised 1000 Electro Galvanised 700 Electro Galvanised 400 Electro Galvanised 200

1.4 1.6 2.7 4.4 6.5

Each Each Each Each Each Each

12.7

Quick Links

Product Code

Size (mm)

Finish

Pack Qty

Weight Per 100 (kg)

UOM

420603 3.5

Galvanised Galvanised Galvanised Galvanised

3000 1250

0.908

Each Each Each Each

420605 5 420606 6 420608 8

2.27

800 400

3.632 8.172

22 | EMAIL info@bunzlsafety.com.au | bunzlsafety.com.au | CALL 1300 977 577

CALL 1300 977 577 | bunzlsafety.com.au | EMAIL info@bunzlsafety.com.au | 23

LIFTING & LASHING POINTS Bolt-on Rotating Lifting and Lashing Point – Grade 100 The ERLP rotating, bolt-on lifting and lashing points offer the ideal solution for lifting or load lashing when a permanent or semi-permanent point is required. Their slim line design fits in confined spaces. Easy to fit with the hexagonal screw, the ERLP is able to rotate 360 degrees and articulate 180 degrees. It is forged in Grade 100 material and features a dismountable open D-ring. Suitable for the mining, heavy construction, road or rail transport or maritime industries.

Grade 100 Weld-on Lifting and Lashing Rings

Suitable for the mining, offshore exploration, road or rail transport and maritime industries. Features • Grade 100 Quality Alloy Steel, quenched and tempered • 100% magnetically crack inspected (MPI)

• Easily welded into required position with the aid of height lugs on the weld block • Lifting ring has durable powder coated baked enamel finish

• Offers a full working load limit at all angles

• Extremely high strength attachment

• Test certificate available.

• Lifting ring and welding block are both marked for accurate traceability

Product Code L

M (mm)

B (mm)

D (mm)

C (mm)

H (mm)

Y (mm)

Weight (kg)

(mm)

ERLP-M8-10 15 M8 Ø27 10 20 63 52 0.257 ERLP-M10-10 20 M10 Ø27 10 20 63 52 0.268 ERLP-M12-10 19 M12 Ø38 15 31 91.8 73 0.772 ERLP-M16-10 24 M16 Ø38 15 31 91.8 73 0.8

Product Code

WLL Tonnes (kg)

A (mm)

B (mm)

C (mm)

D (mm)

E (mm)

F (mm)

G (mm)

I (mm)

M (mm)

Weld (mm) HV+aL

Weight (kg)

BALPV015 1500 38 79 66 14 13.5 32 25 31 2 HV5+3 0.40 BALPV025 2500 45 92.5 77 16 13.5 36 27 38 3.5 HV7+3 0.60 BALPV040 4000 51 102 87 18 16.5 42 32 40.5 2 HV8+3 0.90 BALPV067 6700 67 138 115 24 22.5 61 44 55 4 HV12+4 2.0 BALPV100 10000 67.5 142 129 26.5 57.5 75 53 57.5 4 HV16+4 3.0 BALPV160 16000 100 21.5 190 40 26 95 69 85 5 HV25+6 6.9

24 | EMAIL info@bunzlsafety.com.au | bunzlsafety.com.au | CALL 1300 977 577

CALL 1300 977 577 | bunzlsafety.com.au | EMAIL info@bunzlsafety.com.au | 25

RUD Power Point PP-B Ring Connection 360° swivelling/180° pivoting double ball bearing Features • Easy identification of WLL

• Can also be used for through holes

• Loadable in any direction. Safety factor 4 : 1 • Double ballbearing for free turning and soft winding

• Can be turned under full load even in a 90° position from the bolt centre line • Not suitable for permanent swivelling under full load.

M SW

• All parts 100 % crack detected

• Max. load limit at smallest thread diameter

PP-VIP – for direct chain connection of the VIP chain Product Code Product Code WLL (t) A VIP-Chain connection D (mm) F (mm) G (mm) M (mm) SW (mm) Weight (kg) 7989525 PP-VIP4-0.63t-M12 0.63 4 40 18 41 12 36 0.25 7989526 PP-VIP6-1.5t-M16 1.5 6 46 25 50 16 41 0.45 7989527 PP-VIP8-2.5t-M20 2.5 8 61 30 61 20 55 0.95 7989528 PP-VIP10-4t-M24 4.0 10 78 36 77 24 70 2.2 7989529 PP-VIP13-5t-M30 5.0 (6.7) 13 95 45 93 30 85 3.5 7989530 PP-VIP16-8t-M36 8.0 (10) 16 100 54 102 36 90 5.2

• Variable screw lengths available

R 1

( ) increased WLL at axial load direction

D M

PP-S/PP-B/PP-VIP – all types in special thread lengths available Please indicate type, thread size and F- vario !

F Load limit

PP-B – the ring connection for hook assemblies

F Load

Type Thread Size F- Vario max. (mm) So-PP-S/PP-B/PP-VIP 0.6 (0.63) M 12 140 1/2”-13UNC 45 So-PP-S/PP-B/PP-VIP 1.0 (1.5) M 14 65 – – So-PP-S/PP-B/PP-VIP 1.3 (1.5) M 16 180 5/8”-11UNC 55 PP-S/PP-B/PP-VIP 2.5 M 20 200 – – So-PP-S/PP-B/PP-VIP 3.5 (4) M 24 255 1”-8UNC 74 So-PP-S/PP-B/PP-VIP 5.0 (6.7) M 30 330 1 1/4”-7UNC 91 So-PP-S/PP-B/PP-VIP 8.0 (10) M 36 300 – – WLL (t) Thread size F- Vario Max. (mm)

Product Code Type

WLL (t)

A (mm)

B (mm)

C (mm)

D (mm)

E (mm)

F (mm)

G (mm)

M (mm)

SW (mm)

R 1 (mm)

Weight (kg)

7989522 7989523 7989081 7989082 7989524 7989083

PP-B-0.63t-M12 0.63 9

65 35 40 105 18

41 12 36 15 0.35

PP-B-1.5t-M16 1.5 PP-B-2.5t-M20 2.5

11 65 35 46 115 24 50 16 41 15 0.6 13 75 40 61 135 30 61 20 55 18 1.1 16 95 45 78 172 36 77 24 70 20 2.1 5.0 (6.7) 21 130 60 95 223 45 93 30 85 25 4.5 8.0 (10) 24 140 65 100 242 54 102 36 90 28 6.1 4.0

PP-B-4t-M24 PP-B-5t-M30 PP-B-8t-M36

PP-S

PP-B PP-VIP

( ) increased WLL at axial load direction

Warranty can only be guaranteed with originally assembled RUD components and chains!

F-vario with washer and 100% crack detected nut

26 | EMAIL info@bunzlsafety.com.au | bunzlsafety.com.au | CALL 1300 977 577

CALL 1300 977 577 | bunzlsafety.com.au | EMAIL info@bunzlsafety.com.au | 27

Page 1 Page 2-3 Page 4-5 Page 6-7 Page 8-9 Page 10-11 Page 12-13 Page 14-15 Page 16-17 Page 18-19 Page 20-21 Page 22-23 Page 24-25 Page 26-27 Page 28-29 Page 30-31 Page 32-33 Page 34-35 Page 36-37 Page 38-39 Page 40-41 Page 42-43 Page 44-45

Made with FlippingBook - Online magazine maker