BEAVER RIGGING SCREWS
BEAVER RATED RIGGING HARDWARE Beaver Rated Rigging Hardware complies with a number of different standards. They have a working load limit (WLL) and are rated for lifting applications. Beaver’s range of quality rigging hardware is manufactured from the finest milling techniques and designed for both heavy industry use and general hardware applications. TURNBUCKLES
BEAVER RIGGING SCREWS AND TURNBUCKLES
Turnbuckle End Fittings
Jaw and Eye Rigging Screw
Jaw and Eye Combination Turnbuckle
Jaw and Jaw Combination Turnbuckle
Hook and Hook Combination Turnbuckle
Eye
Jaw
Stub
Hook (Has Reduced Capacity)
Hook and Eye Combination Turnbuckle
End fittings must be secured. Securing of Turnbuckle End Fittings
Do not use jam Nuts
Lock wire will hold
Turnbuckle Inspection Areas
Rated load depends on end fittings & thread
Check for cracks & bends
Check for thread damage &bent rods
Lifting use weldless construction (Rigging Screw). Rigging use alloy steel. Vibration lock using wire.
Check for cracks & bends
Check for thread damage &bent rods
Locknuts are not effective and add greatly to the load in the screw thread. Tightening apply only torque as for bolt of equal size.
Check for cracks & bends
Check for thread damage &bent rods
Check for cracks & deformations
141
MATERIALS HANDLING TECHNICAL MANUAL | VOL. 4
Made with FlippingBook - Online catalogs