Performance / Elite Countersink Bits Countersink Application
Min. RPM
Materials designed for use on
Shank Type
Shank
Characteristics
Barcode
Cu,Ni, Ms,Zn
This Countersinking Bit is made of alloy steel and is an economical type of bit. It can make a variety of holes up to M6.
1/4” Hex
600
0088381433389
METAL
WOOD
NON-FERROUS METAL
1000 1000 1000
0088381376112 0088381376129 0088381376136 0088381376143 0088381376150 0088381376167 0088381376174 0088381376181 0088381376198 0088381376204 0088381376211 0088381376228
Cu,Ni, Ms,Zn
This Countersink Bit with three cut- ters and large flutes are used for deep countersinking. The shank is in C form and can be used with a variety of bit holders.
1/4” Hex
600 600 600
METAL
WOOD
NON-FERROUS METAL
1000 1000 1000 1000
Cu,Ni, Ms,Zn
This Countersink Bit range is the most common type of countersink bit. Straight shank. Countersink with five or more cutters are used for flat countersinking.
6mm
METAL
WOOD
Cylindrical
NON-FERROUS METAL
600 600
5mm 1000
0088381376235
1000
0088381376242
Cu,Ni, Ms,Zn
6mm
This is the most common type of Countersink Bit. Straight shank. Countersink with three cutters and large flutes are used for deep countersinking.
1000
0088381376259
8mm 600
0088381376266
Cylindrical
600
0088381376273
METAL
WOOD
NON-FERROUS METAL
10mm
600
0088381376280
600
0088381376297
Shank (Diameter)
Min. RPM
Materials designed for use on
Diameter
Characteristics
Barcode
6mm 1000
0088381376303
Conical head with a slant opening. Due to the special cutting edge geometry, the filing can escape in a continuous flow which allows more stable, smooth countersinking especially in thin metal sheets.
Cu,Ni, Ms,Zn
8mm 1000
0088381376310
10mm 600
0088381376327
Cylindrical
METAL
SHEET METAL
NON-FERROUS METAL
12mm 600
0088381376334
COUNTERSINKING OF DRILLED HOLES (Counter boring for pan head screws)
DEBURRING OF PIPES
DEBURRING OF DRILLED HOLES
www.makita.com.au | Customer Service 1300 361 690
Made with FlippingBook - Online Brochure Maker