Carbide Tipped Saw Blades Tooth Shape
ATB
ATAF
ATAFR
M FORCE
FTG
Combines the ATB tooth style on each individual tip instead of alternating the teeth left and then right. Provides twice the cut speed with less teeth. 12 tooth blade is equal to a 24 tooth blade.
Alternate Top / Alternate Face with Raker - similar to ATAF but the Raker sits lower to provide more stability and increase chip ejection.
Alternate Top & Alternate Face - Extra Sharp, Tooth face alternates left & right, best suited for Cross Cut.
Alternate Top Bevel - Rip & Cross Cut Blade.
Flat Top Grind - Best suit to cutting with the grain.
TCG
MTCG
SMTCG
HI-ATB
EFFICUT
Alternate Top / Alternate Face with Raker style tooth with the added advantage of Ultra Thin Kerf and specially designed tooth face to provide less resistance during the cut to provide a faster cutting action and a longer run time with cordless saws.
High Alternate Top Bevel - The high top angle on the tooth combined with the reduced rake angle for fine finishing in Melamine and fine plywood.
Triple Chip Grind - Best suited for harder material such as Laminated timber and Aluminium.
Special Modified Triple Chip Grind - Best suited for thin mild steel and Stainless Steel cutting.
Modified Triple Chip Grind - Best suited for mild steel cutting.
Technical Information
KNOT AND NAIL
PCD
BLUEMAK, EFFICUT AND LAMINATE BLADE RANGES ONLY
PLUNGE SAW AND LAMINATE
EXTRA HARD K01 hard tungsten tips retain sharp cutting edge for maximum life providing extra fine cutting performance. Laminate / Plunge Saw & Composite Ranges Only
TIP EMBEDDED Knot & Nail demolition type blades teeth are especial designed for longer service life with greater tip support and specialized double brazing method to ensure the teeth are not ripped out when cutting through nails or screws that are hidden in the timber.
POLY-CRYSTALLINE DIAMOND TIP
COATED PTFE ( polytetrafluroethylene ) coating to reduce pitch build up and to decrease resistance during the cutting action.
Poly Crystalline Diamond have extreme hardness and wear resistance. PCD tipped blades are best suited for abrasive materials such as Fibre cement board.
LASER SLOT Vibration dampening system - Laser cut slots with resin bond filling to smoother and quieter cutting.
www.makita.com.au | Customer Service 1300 361 690
Made with FlippingBook - Online Brochure Maker