7.5m MAKTAPE With Holder and Hook
1. Attach the safety chord to the metal ring of the tape and the bottom of the belt clip. (Safety Cord can drop a max of 1.3m) 2. Push down the yellow clip to unlock the belt clip. Widen the belt clip to allow the belt to slide through. Takes 5.5mm thick x 50mm wide and 2.4mm thick x 50 - 60mm wide belt. Push the yellow clip up to lock the belt in place 3. Release the tape by pressing the yellow lever forward 4. Your tape and belt clip are ready to use
1
2
3
4
Double Sided Scale
Matte Finish
Shock Absorb
• Easy to read on both sides, even folded on a return
• A retraction dampener that has been installed to absorb the shock when the hook is being retracted. This works well in combination with the 4 rivets.
• Matt finish on the coating makes the scale easy to read in all types of light conditions.
• Scale on the back makes it easy to use as a ruler while turned over
4 Rivet + Protector
Hook Protection
Magnetic
• To provide more durability for the hook, 4 rivets are provided to absorb the shock when being retracted. The protector on the backside is not held by the 4 main rivets to ensure the hooks durability.
• Hook protection is provided on both sides of the hook to protect it in the case it is dropped and also stops the hook from catching on items when retracted.
• 2 x Neodymium Magnets installed in the hook provides a strong connection to metallic surfaces.
Part No.
Description
Barcode
B-57174
7.5M MAKTAPE H/Duty (cm) 1pc with holder/cord
088381497640
www.makita.com.au | Customer Service 1300 361 690
Made with FlippingBook - Online Brochure Maker