Good drill bits are one of the most important parts of any tool box. The wrong bit can mean a poor finish, or a damaged tool and could be potentially dangerous. Makita offer a full selection of drill bits; meaning the right accessory for the job is available. Wood Drill Bit Series
A
B
C
A
Description
Point
Shank Diameter
Flat Spade Bit
Straight
Brad Point
6 – 36mm 1/4”– 1-1/2”
Suitable for drilling holes with medium to large diameters in soft wood or soft plastic.
1/4” Hex
6 – 35mm 1/4”– 1-1/4”
Brad Point Drill Bit
Straight
Brad Point
Most popular drill bit for wood drilling. For drilling holes with small to medium diameters. Suitable for general wood drilling & soft plastic. Highly effective in drilling clean & precise holes better than flat spade bits.
3 – 20mm
1/4” Hex
2 – 12mm
Formwork Drill Bit
Chisel Edge
Straight
Anti Clogging Chisel edged Drill bits design for form-ply and bracing. 400 & 600mm Lengths.
8 – 30mm
Single Spur Auger Bit
Straight
Auger Thread
For drilling deep holes with medium to large diameters in soft and hard wood. Threaded screw point pulls bit into the work piece providing a fast, easy to use self feeding action. Highly effective for drilling clean & precise holes. Suitable for knotty nail embedded wood which is difficult to drill with a single spur auger. Ideal for plumb- ing and electrical installation etc. Rough cut finish on both sides of hole. Suitable for drilling of blind holes or penetrating holes of medium to large diameters with high quality results. Best suited for drilling concealed hinges in Laminated MDF & Chipboard. Suitable for drilling of blind holes or penetrating holes of medium to large diameters with high quality results. Ideal for precise work in furniture making and concealed hinges. For drilling large diameter holes such as pipe and conduit in wood. Threaded screw point pulls bit into the work piece providing a fast, easy to use self feeding action. Ideal for plumbing and electrical installation / countersinking washers for jetty construction.
6 – 30mm
1/4” Hex
6 – 21mm
Ship Wood Auger Bit
Auger Thread
5/16” & 7/16” Hex
10 – 38mm
TCT Hinge Cutting Bit
Brad Point (short)
Straight
20 – 35mm
Forstner Drill Bit
Brad Point (short)
Straight
10 – 50mm
Self Feeding Bit
Auger Thread
7/16” Hex
1”– 3” 25.4 – 76.2mm
www.makita.com.au | Customer Service 1300 361 690
Made with FlippingBook - Online Brochure Maker