Defender Downdraft Table Series User & Maintenance Manual

(9.1) P OWER D ISCONNECT S WITCH / E MERGENCY S HUT O FF S WITCH

This switch controls the main power to the Downdraft Table.

When the switch is in the “0” or "OFF"

position, the main power to the unit is

disconnected.

• When in the “1” or "ON" position, the main

power is reaching the unit and it can be

started.

• Under normal operating conditions, the unit

will not start when the green "START" push

button is depressed if the disconnect is in

the "0" or "OFF ” position .

• This switch also provides a means to lock out the switch using a small padlock thus

preventing accidental power up.

• This is an interlocking disconnect; meaning, the door to the electrical box will not open if the

switch is in the "ON" position.

When dial is in:

“0” position — all main power to the unit is OFF.

“1” position — the unit is powered up and ready for operation, the unit is ON

CAUTION:

Prior to performing maintenance always use a voltmeter to confirm the

power source is locked out.

Page 14

sales@clean-air.com

1-866-665-1829

www.clean-air.com

www.clean-air.com

14

Made with FlippingBook Online newsletter maker