(6) INSTALLATION
• The Clean Air Industries Defender Downdraft Tables are very easy to install and operate. Move the unit to a desired location by using a forklift. Connect the electrical connection and
the compressed air connection (70-90psi).
• To Power ON the unit, locate the ON/OFF switch at the front of the unit,
• On units with electrical panel, turning the red knob will activate the electrical panel; pressing
the green start button will run the unit, pressing the red stop button will stop the unit.
• To Power the LED light (Hood option only), plug lights into their own 110V outlet. Press the
ON/OFF switch located on the side of the LED light
(6.1) G ENERAL I NSTALLATION G UIDELINES
Clean Air Industries Defender Downdraft Table units are shipped via freight and arrive on a flatbed trailer. The main units are fully crated, on a pallet, and are shipped standing up. Use a forklift truck,
driven by a qualified individual, to remove the crate / pallet from the truck. Occasionally, fork
extensions are helpful. Forklift lifting locations are labeled at the front of the unit with “Lift Here”
stickers ( shown below)
. 3ft
Page 9
sales@clean-air.com
1-866-665-1829
www.clean-air.com
www.clean-air.com
9
Made with FlippingBook Online newsletter maker