POLY: Multiple Sensor Electronic Control System POLY is a multiple sensor electronic control system for LED luminaires. The electronic control module, only 18 mm thick, is connected between the power supply and the lamps (both 12Vdc and 24Vdc), and can host up to 3 sensors of the various Domus Line models available: infra-red proximity sensors and pyrolytic presence sensors. If you wish to control just 2 sensors, MINI POLY is the solution for you. The control module integrates a set-up button with which the function can be modified at any time – from back-of-door sensor to switch.
POLY: PIR Motion Sensor The PIR sensor for POLY switches on when someone moves inside the detection field and, after approximately 180 seconds with no movement, automatically switches off the luminaires connected to the control module, even if the door remains open. POLY: IR Door Back Proximity Sensor or Dimmable Touch Switch The IR sensor for POLY – in limit-switch mode – turns on the luminaires when the door is opened. With the on-off and dimmer set-up, the IR sensors are switched on and off and the brightness of the luminaires can be adjusted simply by moving a hand near the sensor. Recess installation or surface mount with use of support (included).
IR Sensor shown with surface mount support
See POLY in action
24
Detailed product information on page 36
Design and manufacture by B&E German Kitchens, Auckland
Made with FlippingBook - Share PDF online