Technical training
Blade Repair Standard / V5 23022026
The participants shall:
Practise the ability to:
a. use filler to cover the repair and to match the surrounding aerodynamic profile of the blade
b. use a sander to shape the filler to match the surrounding aerodynamic profile, and create the correct surface finish for the adhesion of the paint layer
c. apply the knowledge gained in Lesson 21 (Painting) to apply two-factor component paint to repairs using a roller
ELEMENT 29.5 - RECORD AMBIENT TEMPERATURE AND HUMIDITY
Learning objectives:
279) The participants can perform the recording of the ambient temperature and humidity throughout the process using a data logger (Skills, intermediate level)
280) The participants can act independently in recording and documenting the ambient temperature and humidity throughout the entire trailing edge repair process (Ability, intermediate level)
The participants shall:
Without help from the instructor, act independently in recording and documenting the ambient temperature and humidity throughout the entire trailing edge repair process
LEADING EDGE REPAIRS
440 min.
The aim of the lesson is to enable the participants to conduct laminate repairs on a leading edge safely and effectively.
The participants should always refer to the safety data sheets, technical data sheets, work instructions and relevant applicable legislation throughout the duration of the repair conducted in this lesson
Note
Global Wind Organisation / www.globalwindsafety.org
136 / 187
Made with FlippingBook flipbook maker