Technical training
Blade Repair Standard / V5 23022026
The participants should always perform correct segregation and disposal of waste produced during this lesson
Note
After having successfully completed this lesson of the Blade Repair Module, the participants can:
281) Take responsibility for conducting laminate repairs on a leading edge safely and effectively (Ability, intermediate level)
ELEMENT 30.1 - MINIMISE RISKS ASSOCIATED WITH COMPOSITE FIBRE WORK
Learning objective:
282) The participants can act independently in applying the knowledge gained during the general safety lessons to the working environment to minimise the risks associated with composite repair work (Ability, intermediate level)
The instructor shall:
Continually assess and give feedback on the participants’ ability to apply the knowledge gained during the general safety lessons to the working environment to mitigate the risks associated with composite repair work
The participants shall:
Practise the ability to apply the knowledge gained during the general safety and chemical safety lessons to their working environment by correctly selecting and using PPE appropriate to the task in hand and to work in a safe manner with the materials and tools required for each process
ELEMENT 30.2 - REPAIR TASK
Learning objective:
283) The participants can act independently in applying the lamination and curing skills gained during Lesson 27 (Laminate Repairs) to carry out laminate repairs to repairs on the leading edge (Ability, intermediate level)
Global Wind Organisation / www.globalwindsafety.org
137 / 187
Made with FlippingBook flipbook maker