Technical training
Blade Repair Standard / V5 23022026
292) The participants can perform repair of the inner and outer laminate of a sandwich panel in accordance with a work instruction (Skills, intermediate level)
293) The participants can act independently in performing repair of the inner and outer laminate of a sandwich panel in accordance with a work instruction (Ability, Intermediate level)
The instructor shall:
Using the sandwich panel created in the sandwich panel topic, create a small hole, approximately ten millimetres in diameter, that extends through both the outer and inner laminates
Demonstrate how to:
a. remove the outer laminate and the core material to reveal the inner laminate
b.
remove damaged material from the inner laminate
c. use hardback and non-structural adhesive to create a support upon which to repair the inner laminate
Facilitate practice to improve the participants´ ability to:
a. in accordance with a work instruction, create a support using hardback and to perform a laminate repair with the correct overlaps and fibre orientation on the inner laminate
b. repair the outer laminate with the correct overlaps and fibre orientation, after replacing the core material
Give constructive feedback on the participants’ above practice
The participants shall:
Practise the ability to:
a. create a support using hardback and to perform a laminate repair with the correct overlaps and fibre orientation on the inner laminate (in accordance with a work instruction)
b. repair the outer laminate with the correct overlaps and fibre orientation, after replacing the core material
Global Wind Organisation / www.globalwindsafety.org
142 / 187
Made with FlippingBook flipbook maker