Technical training
Blade Repair Standard / V5 23022026
Give constructive feedback on the participants’ above practice
The participants shall:
Practise the ability to:
a. determine the correct dimensions of the bond line in the trailing edge from a blade drawing or manufacturer’s work instruction
b. drill injection and verification holes in the trailing edge
c. inject adhesive into the trailing edge in accordance with a work instruction
d. apply the knowledge gained in Lesson 21 (Painting) by applying two-factor component paint to repairs using a roller
SUMMARY AND FINAL TEST
60 min.
The aims of the final test are to summarise the Blade Repair Module and to assess the participants’ understanding of key theoretical and safety related elements of the module.
After having successfully completed this lesson of the Blade Repair Module, the participants can:
a.
Pass the final test
ELEMENT 33.2 - SUMMARY
The instructor shall:
Summarise the Blade Repair Module referring to the learning objectives covered
ELEMENT 33.3 - FINAL TEST
The instructor shall:
Introduce the final test and explain the criteria for the test with reference to the participant performance assessment
Global Wind Organisation / www.globalwindsafety.org
148 / 187
Made with FlippingBook flipbook maker