Technical training
Blade Repair Standard / V5 23022026
ANNEX 1 - EQUIPMENT LIST
The following pages specify the equipment required to deliver each module in alignment with this training standard. All equipment shall meet the criteria defined in the GWO Requirements for Training and is intended for use in physical training settings to support safe and effective learning and assessment.
1.
Documentation:
1.
safety data sheets for all materials used throughout the training module
2. technical data sheets (where applicable) for materials used throughout the training module
3.
work instruction examples
4.
photocard
5.
blade inspection report
6.
risk assessment templates and examples (hand out)
2.
Measuring Tools (enough for all participants):
1.
ambient temperature & humidity data logger
2.
thermocouple temperature gauge and probes
3.
absolute pressure gauge (vacuum gauge)
4.
0-150 mm rule
5.
0-300 mm rule
6.
tape measure
7.
weighing scale
8.
wet film thickness gauge
3.
Power tools (enough for all participants)
1.
heating blankets
2.
vacuum pump
3.
electric orbital sanding machine
4.
electric grinding machine
Global Wind Organisation / www.globalwindsafety.org
152 / 187
Made with FlippingBook flipbook maker