Technical training
Blade Repair Standard / V5 23022026
Step 14
Verify wet film thickness using a wet film gauge.
Step 15
If needed, then apply topcoat until the required wet film thickness is achieved: 1. Before new paint is applied, ensure that the previous film is touch dry on both the sunny and shady sides. 2. Apply topcoat by repeating the following steps: ► Step 13 and Step 14
Step 16
Record the wet film thickness: 1. Take a picture of wet film thickness measurement with a wet film gauge. 2. Fill in the checklist: ► Application of Topcoat
Global Wind Organisation / www.globalwindsafety.org
178 / 187
Made with FlippingBook flipbook maker