Technical training
Blade Repair Standard / V5 23022026
Tasks to perform after the step by step: Housekeeping
A Wind turbine cleanness
Always keep work area clean. Clean if needed.
B Packing up tools
Gather, clean and organize all the tools used during this operation.
C Packing up toolkits
After using the toolkits required for this operation, gather and clean them for later use. Remove the transport toolkits according to the corresponding return operation. It is also necessary to visually check the condition of each one.
D Waste collection
Gather all of the waste generated during this operation (silicone tubes, paper towels, pallets, boxes, etc.)
Follow site rules for treatment and disposal of refuse.
Global Wind Organisation / www.globalwindsafety.org
180 / 187
Made with FlippingBook flipbook maker