Technical training
Blade Repair Standard / V5 23022026
The participants shall:
Engage in a group discussion on:
a. typical blade faults, damages, possible causes and the subsequent performance implications
b. the role of listed mitigations in element 14.5.2 (above) in reducing blade damage
MATERIALS
75 min.
The aim of the lesson is to enable the participants to handle various materials safely and efficiently when working with blade inspection and repair.
After having successfully completed this lesson of the Blade Repair Module, the participants can:
105) Act independently when working with various materials during blade inspection and repair (Ability, intermediate level)
106) Explain the differences in characteristics and application of the material types when working with inspection and repair (Knowledge, intermediate level)
When handling materials participants should always select and apply correct PPE
Note
ELEMENT 15.1 - REINFORCEMENT MATERIALS
Learning objective:
107) The participants can explain the reinforcement materials used in composite laminates and how those materials resist tensile loads in the blade (Knowledge, intermediate level)
The instructor shall:
Explain that reinforcement materials give strength to the composite by resisting tensile loads in a laminate structure
Describe the different types of reinforcement materials used in blade production (glass fibre and carbon fibre)
Define the terms 'UD', 'Biax' and 'Triax' in relation to reinforcement materials
Global Wind Organisation / www.globalwindsafety.org
62 / 187
Made with FlippingBook flipbook maker