Technical training
Blade Repair Standard / V5 23022026
TOOLS AND EQUIPMENT
40 min.
The aim of the lesson is to enable the participants to handle tools and equipment correctly in accordance with the task at hand during blade inspection and repair.
After having successfully completed this lesson of the Blade Repair Module, the participants can:
117) Show interest in handling tools and equipment required for blade inspection and repair safely and correctly (Ability, basic level)
ELEMENT 16.1 - MECHANICAL, ELECTRICAL AND PNEUMATIC PRINCIPLES
Learning objectives:
118) The participants can recognise basic mechanical, electrical, hydraulic principles, and associated risks (Knowledge, basic level)
119) The participants can explain how to utilise the tools required for blade inspection and repair in a correct and safe manner (Knowledge, intermediate level)
The instructor shall:
Describe which tools are required for blade inspection and repair processes
Describe the principle of the operation of electrical and pneumatic grinders, sanders, and drills
Explain:
a. the risks associated with electrical and pneumatic grinders, sanders, and drills
b. how to safely and correctly use electrical and pneumatic grinders, sanders and drills by considering guarding, personal protective equipment and ergonomic practices
c. how to safely and correctly use a pneumatic glue gun
d.
how to safely and correctly use a manual glue gun
Describe the principle behind vacuum pump operation
Explain how to use a vacuum pump and how to protect the pump from excess resin using a resin trap
Explain the risks and hazards associated with working with a low resistance ohmmeter or equivalent
Global Wind Organisation / www.globalwindsafety.org
68 / 187
Made with FlippingBook flipbook maker