Technical training
Blade Repair Standard / V5 23022026
The participants shall:
Share their understanding of the differences between structural and non-structural adhesives
Practise the ability to cut the sandwich panel in half and to bond the two halves together to create a trailing edge section
PAINTING
120 min.
The aim of the lesson is to enable the participants to paint a blade to a specific layer of thickness safely and in accordance with a work instruction.
After having successfully completed this lesson of the Blade Repair Module, the participants can:
181) Take responsibility for painting a blade to a specific layer of thickness, safely and in accordance with a work instruction (Ability, intermediate level)
The participants should always refer to the safety data sheets, technical data sheets, work instructions and relevant applicable legislation throughout the duration of the repair conducted in this lesson
Note
The participants should always perform correct segregation and disposal of waste produced during this lesson
Note
ELEMENT 21.1 - COMPLETION OF BLADE
Learning objectives:
182) The participants can apply the described paint layers and complete the blade build (Skills, intermediate level)
183) The participants can act independently in painting a blade to a specific layer of thickness in a safe manner (Ability, intermediate level)
The instructor shall:
Explain:
Global Wind Organisation / www.globalwindsafety.org
98 / 187
Made with FlippingBook flipbook maker