Safety training
GWO Basic Safety Training / V20 10032026
Sea Survival
SS
SSR
Table 5.6.1 – GWO BST Module course codes
5.7 Participant Prerequisites for the BST
All personnel participating must meet the participant prerequisites described in the GWO Requirements for Training.
To attend a BST Refresher Training, the participants shall possess a valid WINDA training record for BST Initial or Refresher training.
Current BST training record holders can attend either a refresher training or an initial training.
6. USING THIS STANDARD TO DEVELOP TRAINING
If you have questions about this standard you can access support and read answers to FAQs in the GWO Help Centre
Note
The training in this standard is designed around the GWO taxonomy described in the GWO Requirements for Training. Theoretical and practical activities must be delivered according to the defined taxonomic level to reach the described learning objectives.
Each module is divided into two sections: Initial Training and Refresher Training and is required to be delivered separately.
When teaching safety equipment, a generic approach shall be applied aiming to avoid additional potential product specific formal training after completion of this training. However, national legislation, company gap analysis and location specific risk assessments may require additional product specific familiarisation which is the responsibility of the duty holder.
In addition to this, all training based on this standard including all related resources shall, as a minimum, meet the requirements described in the GWO Requirements for Training.
Global Wind Organisation ©2026/ www.globalwindsafety.org
16 / 341
Made with FlippingBook Digital Proposal Creator