Safety training
GWO Basic Safety Training / V20 10032026
a. to the ladder stiles and, where clearly identified as suitable, to reinforced ladder rungs. In all other cases, the hooks should be connected around the stiles
b.
to certified and structural anchor points
Facilitate practical exercises for the participants covering the scenarios presented in this element
Provide constructive feedback on the participants’ performance during the practice
Note Alongside manufacturers requirements, internal organisational and site-specific safety guidelines on attaching fall arrest lanyards should always be followed
While adhering to legal regulations and standards, the training provider must continuously ensure that the training material is updated and aligned with industry guidelines from G+, specifically Working at Height in the Offshore Wind Industry
The participants shall:
Identify and select certified and structural anchor points for the attachment of fall arrest lanyards and work positioning lanyards
Practise the ability to correctly attach fall arrest lanyards and work positioning lanyards while working at height during practical exercises, covering the scenarios presented in this element
ELEMENT 4.4 - CORRECT ATTACHMENT TO THE HARNESS
Learning objective:
27) The participants can perform the correct attachment of fall arrest lanyards and work positioning lanyards to harness attachment points (front, dorsal or side D-rings) (Skills, intermediate level)
The instructor shall:
Demonstrate how to correctly attach fall arrest lanyards to the harness (front or dorsal attachment point) according to manufacturer’s user manual and relevant country-specific requirements or restrictions
Demonstrate how to correctly attach work positioning lanyards to the harness (front attachment point, and in both side, D-rings at once)
Provide constructive feedback on the participants’ performance during the practice
Global Wind Organisation ©2026/ www.globalwindsafety.org
162 / 341
Made with FlippingBook Digital Proposal Creator