Safety training
GWO Basic Safety Training / V20 10032026
The participants shall:
Perform the correct use, management, and control of PFPE used for working at height from a generic approach and relevance for the situation
Safely and correctly attach a guided type of fall arrester to the fall arrest system
Safely and correctly attach a fall restraint and fall arrest lanyard to a vertical ladder system
a. explain that a reinforced ladder rung of sufficient strength may be used as an anchor point
Safely and correctly use self-retracting lifelines as fall protection system at the skill station
Attach fall restraint lanyards correctly:
a. to the ladder stiles and, where clearly identified as suitable, to reinforced ladder rungs. In all other cases, the hooks should be connected around the stiles.
b.
to certified and structural anchor points
In addition to manufacturers requirements, internal organisational and site-specific safety guidelines on attaching fall arrest lanyards should always be followed
Note
Alongside manufacturers requirements, internal organisational and site-specific safety guidelines on attaching fall arrest lanyards should always be followed
Note
While adhering to legal regulations and standards, the training provider must continuously ensure that the training material is updated and aligned with industry guidelines from G+, specifically Working at Height in the Offshore Wind Industry
ELEMENT 2.4 - SKILL STATION: WORK POSITIONING
Learning objective:
18) The participants can take responsibility for the safe and correct use of work positioning lanyards (Ability, intermediate level)
19) The participants can perform the correct attachment of work positioning lanyards to harness attachment points (front, dorsal or side D-rings) (Skills, intermediate level)
The participants shall:
Global Wind Organisation ©2026/ www.globalwindsafety.org
214 / 341
Made with FlippingBook Digital Proposal Creator