Safety training
GWO Basic Safety Training / V20 10032026
Use a work positioning lanyard to leave their hands free for work
Attach work positioning lanyards correctly:
a. to the ladder stiles and, where clearly identified as suitable, to reinforced ladder rungs. In all other cases, the hooks should be connected around the stiles.
a.i if rungs are not suitable, slings must be connected around the stiles, positioned on one side and centrally on ladder system, to ensure the moving parts of the device can operate freely
b.
to certified and structural anchor points
Demonstrate how to correctly attach work positioning lanyards to the harness (front attachment point, and in both side, D-rings at once)
ELEMENT 2.5 - SKILL STATION: FALL ARREST LANYARDS
Learning objectives:
20) The participants can take responsibility for the safe and correct use of fall arrest lanyards while showing awareness of fall factors (Ability, intermediate level)
21) The participants can perform the correct attachment of fall arrest lanyards to harness attachment points (front, dorsal or side D-rings) (Skills, intermediate level)
The participants shall:
Explain how to use a double, twin and single fall arrest lanyard
Attach work positioning lanyards correctly:
a. to the ladder stiles and, where clearly identified as suitable, to reinforced ladder rungs. In all other cases, the hooks should be connected around the stiles.
b.
to certified and structural anchor points
Demonstrate how to correctly attach fall arrest lanyards to the harness (front or dorsal attachment point) according to manufacturer’s user manual and relevant country-specific requirements or restrictions
Global Wind Organisation ©2026/ www.globalwindsafety.org
215 / 341
Made with FlippingBook Digital Proposal Creator