Safety training
GWO Basic Safety Training / V20 10032026
Practising the procedures for safe transfer can be conducted from the ground to and from any ladder certified for working at height training
Note
ELEMENT 10.2 - SAFE TRANSFER BETWEEN CREW TRANSFER VESSEL AND WIND TURBINE GENERATOR TRANSITION PIECE
Learning objective:
65) The participants can take responsibility for conducting safe transfer between vessel and WTG applying lanyards and connectors (Ability, intermediate level)
The instructor shall:
Facilitate participants’ pre-use inspection of PPE (quick connector included) prior to commencing transfer process
Explain and demonstrate:
a. the importance of identifying hazards (swells, marine growth, waves, equipment failure) relating to the transfer, including the right to say stop/refuse to transfer
b. safe transfer of self between vessel and WTG using:
b.i SRL with quick connector
b.ii SRL without connector
b.iii twin fall arrest lanyards
c. underline the importance of observing and learning from the other participants doing the transfer exercises
Lead the practical training of safe transfer following the procedure
Provide constructive feedback to the participants between the exercises
The participants shall:
Conduct pre-use inspection of PPE (quick connector included) prior to commencing transfer process
Practise two transfers* (one transfer to; and one from the WTG) of self of each type (listed below) per participant:
a.
SRL with quick connector
Global Wind Organisation ©2026/ www.globalwindsafety.org
259 / 341
Made with FlippingBook Digital Proposal Creator