Safety training
GWO Basic Safety Training / V20 10032026
Text updated
•
BST Manual Handling Module
Section 8.2. Duration of the BST Manual Handling Module:
Text updated
•
Section 8.5. Manual Handling Module timetable:
Text updated
•
Element 2.3
Text updated with the removal of “four”
•
BST Fire Awareness Module
Section 9.2. Duration of the BST Fire Awareness Module:
Text updated
•
Section 9.5. BST Fire Awareness Module timetable:
Text updated
•
BST Working at Height Module
Section 10.2. Duration of the BST Working at Height Module:
Text updated
•
Section 10.4. Equipment BST Working at Height Module
Text revised and updated, including:
•
- Explanation of generic training “This enables the participants to conduct pre-use inspection and to use other safety equipment products compared to those taught during this module (based on the manufacturer’s user manual). However, a location specific risk assessment might identify the need for additional instructions. - The introduction of safety instruction “Additional fall protection must always be used during training activities at height. The training provider shall introduce control measures that lower the risks and hazards associated with a fall from height to an acceptable level, following the Hierarchy of Controls in their risk assessment.”
Section 10.5. BST Working at Height Module Timetable:
• The table is updated according to changes in the lesson 8 and the accompanying text has been updated.
Element 5.2 – Pre-use inspection
Learning objective 30 updated
•
Global Wind Organisation ©2026/ www.globalwindsafety.org
314 / 341
Made with FlippingBook Digital Proposal Creator