Safety training
GWO Basic Safety Training / V20 10032026
Lesson 4 – Planning manual handling
Moved form lesson 5.
•
• Name changed from “T.I.L.E. Principle and assessing aggravating factors.
Time increased to 20 minutes.
•
Lesson 5 – Measures to prevent injury during training
New lesson.
•
Lesson 6 – Manual Handling: Risk controls & Proper manual handling techniques
Previous lesson 3 incorporated.
•
• Name changed from lifting techniques and scenario-based training.
Fire awareness changes
Lesson 4 – Fire extinguishing
Inserted table L4-3 of fire classes in element 4.3.4.
•
Working at height changes
12.3 Working at Height instructor to participant ratio
Changed from 1:4 to 1:6 for practical exercises (Remains 1:4 for on-site).
12.4 Equipment for Working at Height module
• Inserted an explanation of the generic approach to training.
• Added a requirement to reduce the potential fall factor.
• Inserted additional control measures for a reduction in anchor point height
Lesson 1 - Introduction
• Time reduced to 15 minutes in line with other GWO Modules.
Lesson 3 – Harness
• Element 3.1 – Name changed to Pre-use inspection.
Element 3.1 - Expanded pre-use inspection.
•
Element 3.2 – Name changed to Fitting.
•
• Element 3.3 – Name changed to Periodic inspections.
Element 3.4 – Name changed to documentation.
•
Global Wind Organisation ©2026/ www.globalwindsafety.org
330 / 341
Made with FlippingBook Digital Proposal Creator