Safety training
GWO Basic Safety Training / V20 10032026
Corrected numerical error in point 3.3
Amendment date
Version
Approved by & date
DECEMBER 2015
7
Description of changes
Introduction
• Removed certification requirement 3 “Type of equipment used in the course and maximum training height (BST Working at Height Module only)” in Working at Height module. Removed due to RUK alignment.
• Consequence of expired certificates added under Validity period.
Working at Height Module
• Removed certification requirement 4 from point 3.3 “Type of equipment used in course and maximum training height”. Removed due to RUK alignment. • Removed part of the note in point 3.3 WaH module saying “However, a climb to a higher height than the minimum height stated in this Standard can be an indicator of the Participant’s capability and aptitude to work at height. The maximum height used during the training must be stated on the certificate”. Removed due to RUK alignment.
Sea Survival Module
Alignment with updated requirements set by UK Health and Safety Executive for boat transfers:
Section 1.5: Objective (3) added
•
• Section 1.6: Lesson 3, Lesson 4, Lesson 5, Lesson 9 and Lesson 10 altered
• Section 1.9: Element 3.2, Element 4.1 and Element 4.2, Element 5.1, Element 9.2, Element 9.3, Element 10.1, Element 10.2 altered
• MES (Marine Evacuation system) added to List of abbreviations
• Removal of Safe Transfer from Vessel to Vessel exercise due to too high risk while practicing (current objective 4 altered and previous Element 5.6 and 10.3 deleted)
• Validity reduced to 24 months (Section 3.2) Equipment for easy detachment added (Section 2.6)
Equipment for easy detachment added (Section 2.6)
Amendment date
Version
Approved by & date Description of changes
Global Wind Organisation ©2026/ www.globalwindsafety.org
338 / 341
Made with FlippingBook Digital Proposal Creator