Safety training
Control of Hazardous Energies Standard / V5 10032026
The total contact time for completing the stand-alone modules in the advanced rescue training standard is 24 hours and 45 minutes. This is based on the times given in the module timetables and summarised in table 7.4 below. The training provider must not exceed the time per day given in table 7.4,1 below.
• Section 7.8 Physical Demands: Text replaced to:
All personnel participating must meet the participant prerequisites described in the GWO Requirements for Training.
Medical Fitness
•
Section removed
•
• Section 9. Using this Standard to Develop Training: Text replaced to:
The training in this standard is designed around the GWO taxonomy described in the GWO Requirements for Training. Theoretical and practical activities must be delivered according to the defined taxonomic level in order to reach the described learning objectives. In addition to this, all training based on this standard including all related resources shall, as a minimum, meet the requirements described in the GWO Requirements for Training.
• Section 10.2. Duration of the CoHE Basic Safety Refresher Module: Text replaced to:
The total contact time for completing the CoHE Basic Safety Refresher module is estimated to be 1 hour and 10 minutes.
The training provider must not exceed the time per day given in the table 10-2 below.
• Section 10.4. CoHE Basic Safety Refresher Module Timetable: Text replaced to:
The delivery of this module must comply with the requirements described in the GWO Requirements for Training.
• Section 11.2. Duration of the Electrical Safety Refresher Module: Text replaced to:
The total contact time for completing this module is 4 hours and 0 minutes. This is based on the times given in the module timetable. The training provider must not exceed the times per day given in table 11-2 below.
• Section 11.5. Electrical Safety Refresher Module Timetable: Text replaced to:
The order in which elements of this module are delivered may vary according to the didactical choices of the delivering training provider. The delivery of this module must comply with the requirements described in the GWO Requirements for Training.
Section 11.6. Lesson 2: Title replaced to:
•
“Hazardous Energy Assessment and Learning Activities”
• Section 12.2. Duration of the Fluid Safety Refresher Module: Text replaced to:
Global Wind Organisation ©2026 / www.globalwindsafety.org
109 / 110
Made with FlippingBook. PDF to flipbook with ease