Safety training
Control of Hazardous Energies Standard / V5 10032026
Assess that each participant can apply the following electrical safe working practices during the assessment activities:
a. working in accordance with an approved work instruction and using electrical diagrams
b. pre-task briefing, minimum electrical PPE, alertness, safe body positioning
c. treating all electrical equipment as live until an electrically safe work condition has been established
d. establishing an electrically safe work condition
e. good housekeeping, illumination, approach boundaries and alerting techniques
f. acting independently to safely control the hazards posed by similar looking or adjacent energised equipment that is in reach, as well as for deranged equipment
g. no use of prohibited articles or blind reaching
Give constructive feedback to the participants performance throughout the activities of this lesson
See Section 7 - Assessment Activities during CoHE Refresher Training for more information
Note
The participants shall:
Engage in the assessment activities, reflect on the received feedback and use the feedback to improve their performance in each subsequent scenario
Required electrical measuring equipment and electrical PPE shall be available and used at all times during the scenario-based training
Note
LESSON 3 - TRAINING REVIEW
15 min.
The aim of this lesson is to enable the participants to reflect on and process their learning outcomes and key takeaways from training, aiming to achieve a high learning transfer from training to their way of working.
ELEMENT 3.1 - TRAINING REVIEW
The instructor shall:
Re-present the overall aims and learning objectives of the training for the participants’ comparison of their learning outcome and the achievement of their previously stated expectations for the training
Global Wind Organisation ©2026 / www.globalwindsafety.org
52 / 110
Made with FlippingBook. PDF to flipbook with ease