Safety training
Control of Hazardous Energies Standard / V5 10032026
The instructor shall:
Demonstrate how to perform component replacement safely and correctly in pressure systems:
a. ensure good housekeeping
b. ensure cleanliness
c. torque up
d. even after proving the pressure is zero, extreme caution must be taken when removing any component in case of trapped pressure
Ask the participants key questions about how to perform component replacement safely and correctly in pressure system e.g.:
a. how would the participants restate or summarise how to perform component replacement safely and correctly in pressure systems in their own words?
b. what happened e.g. what actions were performed by the instructor to perform the component replacement safely and correctly?
c. why were these actions performed?
Facilitate practice for the participants in performing component replacement safely and correctly in pressure systems
Give constructive feedback to the participants’ performance throughout the activities of this element
The participants shall:
Engage in answering questions and share their understanding about how to perform component replacement safely and correctly in pressure systems
Practise performing component replacement safely and correctly in pressure systems
ELEMENT 3.8 - SEARCHING FOR LEAKS IN A PRESSURISED SYSTEM SAFELY
Learning objective:
34) The participants can act independently to search for leaks in a pressurised system, using paper or similar safe method to avoid injection and keep maximum distance (Ability, intermediate level)
Global Wind Organisation ©2026 / www.globalwindsafety.org
73 / 110
Made with FlippingBook. PDF to flipbook with ease