Technical training
Basic Technical Training Standard / V11 10032026
TOTAL
100 min.
6. Post task phase: Pack up and review
6.1
Post-use inspection and packing
6.2
Post-job documentation TOTAL
15 min.
7. Framing the scenario: Bolt tensioning using powered tools
Introduction to bolt tensioning in the wind industry using powered tools and accessories Attitude requirements for working with powered tensioning tools and accessories TOTAL
7.1
7.2
50 min.
8. Pre-task phase: Planning and preparation
8.1
Planning the task
8.2
Preparing for the task
8.3
Planning for safety TOTAL
30 min.
9. The task phase: Safe and correct tensioning of bolts using hydraulic tools
9.1
Setting up equipment for use
9.2
Bolt tensioning
9.3
Bolt loosening
9.4
Safety, quality and trouble shooting TOTAL
90 min.
10. Post task phase: Pack up and review
10.1 Post-use inspection and packing 10.2 Post-job documentation TOTAL
15 min.
11. Using mechanical handling aids to assist with bolt tightening tasks
11.1 Mechanical handling aids typically used in the wind industry 11.2 Using mechanical handling aids 11.3 Hazards associated with using mechanical handling aids 11.4 Mitigating hazards associated with mechanical handling aids TOTAL
35 min.
12. Training review
12.1 Training review TOTAL
15 min.
GRAND TOTAL
540 min.
Table 12.7.1 – BTT Bolt Tightening timetable
Global Wind Organisation / www.globalwindsafety.org
154 / 396
Made with FlippingBook - PDF hosting