Technical training
Basic Technical Training Standard / V11 10032026
• Element 7.1 Preparation, pre-assembly and assembly is the only element in this lesson
Lesson 8 (Old BTTI) Principles of mechanical completion
Lesson removed
•
Lesson 9 Principles of hydraulic completion
• Learning Objective 78 changed from intermediate to basic
• 9.3.2 adjusted to accommodate taxonomy of Learning Objective 78
• 9.3.7 deleted: “Engage in a group discussion about the hazards associated with hydraulic completion”
• Learning objective 79 and 80 – taxonomy added
Lesson 10: Principles of operating with external generators
• Learning objective 125 (old version) on the basic principles of external generators for auxiliary systems removed
• 10.5.2 and 10.5.4 (old version) activities on external generators for auxiliary systems removed.
Lesson 12: Summary and theoretical test
Number of questions & timings changed
•
Annex 1 Equipment List:
• Note added regarding requirements of equipment for Installation Mechanical and Installation Electrical
Annex 1 Equipment List:
• Requirement description on equipment changed: “The following pages specify the equipment required to deliver each module in alignment with this training standard. All equipment shall meet the criteria defined in the GWO Requirements for Training and is intended for use in physical training settings to support safe and effective learning and assessment“ • Specifications of conditions for combined delivery of BTT Installation Mechanical and BTT Installation Electrical.
New - BTT Hazardous Energies Basic Safety Module (HEBS)
• New module added to BTT standard based on migration of the content from GWO Control of Hazardous Energies Version 4 - CoHE Basic Safety (BaSC) module.
• Module name is changed to Hazardous Energies Basic Safety, and course code is changed to (HEBS).
Global Wind Organisation / www.globalwindsafety.org
17 / 396
Made with FlippingBook - PDF hosting