Technical training
Basic Technical Training Standard / V11 10032026
Module combinations that provide for reduced overall timings Modules combinations which allow for reduced overall timings are summarised below in tables 5.4.3, 5.4.4, 5.4.5 and 5.4.6, with a note to explain were reduced timings may be made.
Module Combination
Duration delivered in combination
Mechanical
10 hours 15 minutes
Electrical
9 hours 50 minutes
Hydraulic
9 hours
Bolt tightening
8 hours 45 minutes
Hazardous Energies Basic Safety
2 hours
TOTAL 39 hours 50 minutes
Table 5.4.3 – Combined delivery duration of Mechanical, Electrical, Hydraulic, Bolt Tightening and Hazardous Energies Basic Safety
Time allocated to the introduction lessons of BTT Mechanical, BTT Electrical, BTT Hydraulic and BTT Bolt Tightening may each be reduced by 15 minutes when delivered to the same participants, as the redundant introductory elements shall not be repeated. The contact time for BTT Hazardous Energies Basic Safety may be reduced to 2 hours when delivering to groups in which all participants have already completed GWO BTT Mechanical, BTT Electrical and BTT Hydraulic modules, this is based on the overlap of topics covered within lessons on mechanical safety, electrical safety and pressure fluids safety.
Note
Module Combination
Duration delivered in combination
Mechanical
10 hours 15 minutes
Bolt tightening
8 hours 45 minutes
TOTAL 19 hours
Table 5.4.4 – Combined delivery duration of Mechanical and Bolt Tightening Modules
Time allocated to the introduction lessons of BTT Mechanical and BTT Bolt Tightening may each be reduced by 15 minutes when delivered to the same participants, as the redundant introductory elements shall not be repeated.
Note
Global Wind Organisation / www.globalwindsafety.org
22 / 396
Made with FlippingBook - PDF hosting