Technical training
Basic Technical Training Standard / V11 10032026
Facilitate group discussions about the differences and similarities between the required PPE when working in an installation environment and the required PPE for working with mechanics
Give constructive feedback on the participants’ group discussions about the differences and similarities between the required PPE when working in an installation environment and the required PPE for working with mechanics
The participants shall:
Engage in a group discussion about the differences and similarities between the required PPE when working in an installation environment and the required PPE for working with mechanics
LESSON 3 - GENERAL PROCEDURES FOR WORKING ONSITE WITH INSTALLATION
20 min.
The aim of this lesson is to give participants an understanding of the checklist system through the complete installation process.
ELEMENT 3.1 - CHECKLIST, WORK INSTRUCTIONS AND OTHER DOCUMENTATION
Learning objectives:
30) The participants can recognise the checklist system throughout the complete installation process (Knowledge, basic level)
31) The participants can describe the importance of working according to the approved working practices (Knowledge, basic level)
32) The participants can describe the importance of completing a task properly before starting the next (Knowledge, basic level)
33) The participants can describe the importance of performing toolbox talks every day before commencing work (Knowledge, basic level)
The instructor shall:
Explain the purpose of checklist, work instructions, etc. (show an example of a checklist, work instructions or similar document)
Facilitate discussions with the participants about the importance of:
Global Wind Organisation / www.globalwindsafety.org
222 / 396
Made with FlippingBook - PDF hosting