Technical training
Basic Technical Training Standard / V11 10032026
5.6 Course Codes
Module
Course Code
BTT Mechanical
BTTM
BTT Electrical
BTTE
BTT Hydraulic
BTTH
BTT Bolt Tightening
BTTB
BTT Installation Mechanical
BTTI-M
BTT Installation Electrical
BTTI-E
BTT Hazardous Energies Basic Safety
HEBS
Table 5.6.1 – GWO BTT module course codes
5.7 Participant Prerequisites All personnel participating must meet the participant prerequisites described in the GWO Requirements for Training. Any additional prerequisites for specific BTT modules or for combined module delivery options are detailed in the table 5.7.1 below. Before attending participants must complete any prerequisites indicated. Furthermore, personnel in the wind power industry must be able to read and write to a sufficient standard to be able to carry out instructions and complete the required documentation. It is an advantage if participants are able to read, speak and write English.
Module
Prerequisites
BTT Bolt Tightening
BTT Mechanical
BTT Installation Mechanical
BTT Mechanical and BTT Bolt Tightening
Combined BTT Installation Mechanical & BTT Installation Electrical
BTT Mechanical and BTT Bolt Tightening
(16-hour duration combined delivery option)
BTT Hazardous Energies Basic Safety
BTT Mechanical and BTT Electrical and BTT Hydraulic
(2-hour reduced duration delivery option)
Table 5.7.1 – Participant Prerequisites for BTT Modules
Global Wind Organisation / www.globalwindsafety.org
24 / 396
Made with FlippingBook - PDF hosting