Technical training
Basic Technical Training Standard / V11 10032026
10.2 Risks and hazards associated with the
operation of auxiliary systems with an external generator 10.3 Preconditions for the operation of a lift with an external generator 10.4 Preconditions for the operation of an internal crane with an external generator 10.5 Use of external generators for other auxiliary uses TOTAL 11.1 Handover to commissioning 11.2 Risks and hazards associated with handing over to the commissioning TOTAL
40 min.
11. Introduction to handover to the commissioning
25 min.
12. Summary and theoretical test
12.1 Summary 12.2 Theoretical test TOTAL 13.1 Training review TOTAL
30 min.
13. Training review
15 min.
GRAND TOTAL
745 min.
Table 14.7.1 – BTT Installation Electrical timetable
14.8 Detailed Description of the BTT Installation Electrical Module
LESSON 1 - INTRODUCTION
30 min.
The aim of this lesson is to enable the participants on the GWO BTT Installation Electrical Module training to engage in the training safely and with motivation, while recognising what is expected of them during the training.
If this module is delivered combined with other BTT modules to the same participants, the redundant introductory elements shall not be repeated
Note
After successfully completing this lesson of the BTT Installation Electrical Module, the participants can:
12) Describe the module content and the facilities involved to ensure a clear understanding of what is expected during the module (Knowledge, basic level)
Global Wind Organisation / www.globalwindsafety.org
255 / 396
Made with FlippingBook - PDF hosting