Technical training
Basic Technical Training Standard / V11 10032026
Facilitate group discussions on the risks and hazards associated with lifting operations (wind speed limits, loads falling due to failures in lifting equipment etc.)
Explain the importance of selecting the correct lifting equipment, (also including Working Load Limit)
Explain the importance of inspection of the lifting equipment (including Working Load Limit, markings must be readable)
a.
working load limit
b.
tag with inspection date (not outdated)
c. visual inspection to confirm that it is in good condition
Explain the importance of reporting and tagging (“do not use”) damaged lifting equipment
Show examples of and explain typical procedural errors in lifting operations and damage to the equipment
Explain how to control movement of loads when lifting by means of tag lines
Facilitate a discussion about the consequences of procedural errors in lifting operations and damage to the equipment
Give constructive feedback on the participants’ group discussion on the risks and hazards associated with lifting operations
The participants shall:
Engage in a group discussion on the risks and hazards associated with lifting operations (wind speed limits, loads falling due to failures in lifting equipment, etc.)
Engage in discussions about the consequences of procedural errors in lifting operations and damage to the equipment
LESSON 7 - MAIN COMPONENT PREPARATION, PRE-ASSEMBLY AND ASSEMBLY
20 min.
The aim of this lesson is to give participants basic knowledge of the preparation of main components before installation.
Global Wind Organisation / www.globalwindsafety.org
272 / 396
Made with FlippingBook - PDF hosting