Technical training
Basic Technical Training Standard / V11 10032026
Module
Session
Instructor to Participant Ratio
Theory
1:12
BTT Hazardous Energy Basic Safety
Practical
1:8
Table 15.3.1 - Instructor to participant ratio
15.4 Equipment for the BTT Hazardous Energies Basic Safety Module
The equipment required for training as listed in Annex 1 must be available and must fulfil national legal requirements.
15.5 Timetable for BTT Hazardous Energies Basic Safety Module
The order in which elements of this module are delivered may vary according to the lesson plans prepared for delivering by the training provider.
When delivering to groups in which all participants have already completed GWO BTT Mechanical, BTT Electrical and BTT Hydraulic modules, the learning activities and time allocated for lessons 4, 5 and 6 on mechanical safety, electrical safety and pressure fluids safety should be excluded. Achievement of the learning objectives for these lessons must be confirmed during the other lessons and the practical scenarios.
The delivery of this module must comply with the requirements described in the GWO Requirements for Training .
Lesson
Element
Duration
1. Introduction to the training
Safety instructions and emergency procedures
1.1
1.2
Facilities
1.3
Introduction
1.4
Aim and objectives
1.5
Ongoing assessments
1.6
Motivation TOTAL
10 min.
2. Control of hazardous energies basic safety
2.1
CoHE in the wind industry
2.2
CoHE roles in the wind industry
2.3
Basic PPE and housekeeping
2.4
Protections
2.5
Emergency stop buttons in a WTG TOTAL
30 min.
3.
3.1
Lockout-Tagout in the wind industry
Global Wind Organisation / www.globalwindsafety.org
295 / 396
Made with FlippingBook - PDF hosting