Technical training
Basic Technical Training Standard / V11 10032026
ANNEX 1 - EQUIPMENT LIST
The following pages specify the equipment required to deliver each module in alignment with this training standard. All equipment shall meet the criteria defined in the GWO Requirements for Training and is intended for use in physical training settings to support safe and effective learning and assessment.
Each participant shall have access to a tool kit which contains sufficient tools for them to be able to complete the exercises as detailed in the module.
Each participant shall be provided with PPE appropriate to the task they are performing.
All equipment shall be maintained and where appropriate, inspected and tested in accordance with current national standards/ legislation and manufacturers’ recommendations.
Note
1.
Equipment list: BTT Mechanical
The following equipment is required during the entire duration of this BTT Mechanical Training to meet the needs of the BTT Mechanical Module:
• PPE suitable for mechanical work (mechanical gloves, safety goggles, safety shoes or boots and working clothing)
•
Spanners (1 per two participants)
•
Torque wrenches (at least two different ranges)
•
Sockets
•
Screwdrivers
•
Hexagon (Allen) keys
•
Feeler gauges (1 per two participants)
•
Dial gauge (1 per two participants)
•
Vernier Calliper (1 per two participants)
•
Dial Test Indicators
•
Brake disc
•
Brake pad
• Mock up for bolt torque including various sets of bolts allowing torque and tension
•
A simple cooling circuit (or part of it)
Global Wind Organisation / www.globalwindsafety.org
337 / 396
Made with FlippingBook - PDF hosting