Technical training
Basic Technical Training Standard / V11 10032026
•
Oil
•
Filters
Any equipment used during this GWO training module shall meet or exceed the minimum requirements of the national standards in the country where the training is taking place. When working in a country where there is no applicable national standard then the equipment shall meet or exceed the minimum requirements of the European standards.
4.
Equipment list: BTT Bolt Tightening
The following equipment is required during the entire duration of this BTT Bolt Tightening Training to meet the need of the BTT Bolt Tightening Module:
Bolt Torquing Scenario: •
PPE suitable for bolt tightening work (gloves, safety googles, safety coverall googles that can be worn on top of prescription glasses), safety shoes or working boots and protective work clothing)
•
Hydraulic pump with pendant
•
Hydraulic hoses and couplings
• Hydraulic torque wrench socket type minimum 4500 Nm and minimum socket size 55 millimetres with safety handles • Hydraulic torque wrench cassette type minimum 4500 Nm and minimum socket size 55 millimetres with safety handles • Electrical torque wrench with reaction arm, variable torque settings and a minimum socket size of 55 millimetres • Mock-up for bolt torquing with various sets of bolts, matching the tools being used in the tools on this equipment list
• Counter support/counter wrench/backup wrench matching the tools and bolts being used
•
Up-to-date pressure charts
•
Pins/o-rings for socket securing (cable ties are not acceptable)
•
Markers for bolts (demonstration)
Bolt Tensioning Scenario: •
PPE suitable for bolt tightening work (gloves, safety goggles, safety coverall googles that can be worn on top of prescription glasses), safety shoes or working boots and protective work clothing
Global Wind Organisation / www.globalwindsafety.org
340 / 396
Made with FlippingBook - PDF hosting