Technical training
Basic Technical Training Standard / V11 10032026
• Corrected total calculated time in table 5.4.1 and 11.5.1
Spelling and grammar corrections
•
Added title to table 5.4.4
•
BTT Mechanical Module:
Element 2.1 – Main components of the structure
• Added text to 2.1.1, point e: “and lightning protection”.
• Added text to 2.1.2, point e: “and lightning protection”.
Element 2.1 – Main mechanical systems
Added text to 2.2.1, point f: “/converter.
•
Element 2.3 – How a turbine works:
• Added text to 2.3.1: “using all the components from 2.2.1”
BTT Electrical Module
Element 3.5 Static Electricity
• Added text to 3.5.1: “grounding of components and lightning protection systems.”
Element 4.12 – Processor Control Systems
• Added text to learning objective 69: “and communication between components”.
• Added text to 4.12.1: ”and how the controls system communicates with components via copper signal cable, optical cable, or data cable.”
Bolt Tightening Module:
Element 4.3 PLANNING FOR SAFETY
SS4.3.1 New letter bullet “I” added to both lists “Safety handles as prerequisite to perform operation”
Element 5.1 SETTING UP EQUIPMENT FOR USE
• SS5.1.1 New letter bullet “c” inserted (all subsequent bullets progress one) “Ensure safety handles are mounted for use”
Annex 1 BTT-B equipment list.
• Safety handles added to hydraulic torque tools bullet points x2
• Bolt Tensioning Scenario. Extra parentheses removed and misspelling corrected
• Bolt Tensioning Scenario. Bullet amended to “Mock up for bolt tensioning…”
Global Wind Organisation / www.globalwindsafety.org
387 / 396
Made with FlippingBook - PDF hosting