Technical training
Basic Technical Training Standard / V11 10032026
Element 7.2.2 wording change
•
• Element 3.8.1 Inserted ‘explain ... emergency stop’
Element 3.8.2 Inserted ‘describe typical ...’
•
• Element 3.8.3 Inserted ‘explain that emergency...’
Hydraulic module time changes (Not affecting overall module duration):
Lesson 2 increased from 25 to 30 minutes
•
Lesson 10 reduced from 45 to 40 minutes
•
Hydraulic module content changes:
• Element 2.1.2 Inserted ‘explain the relationship...’
• Element 3.1.2 Inserted ‘according to approved WI’
• Element 3.2.3, 3.2.4 Inserted ‘emergency stop buttons’
• Element 3.3.3 Inserted ‘the risks associated with trapped pressure.
Amendment date
Version
Approved by & date
2018
4
GWO TC 2018
Description of changes
• New module ‘Installation’ developed and inserted.
Amendment date
Version
Approved by & date
2017
3
GWO TC 2017
Description of changes
Content changes:
• New name: Basic Technical Training (replaces Basic Maintenance Training) to reflect a wider target group for the standard
• New intro “Scope” replaces “Foreword and Editorial”
• General: new section on “Understanding GWO Learning Objectives” incl. Taxonomy Table
• General: new section on “Conformity with other training” section added
• Entire course duration shorter (at least 31 hrs and 20 min contact time.) due to elimination of various redundant content and rearrangement of multiple objectives, lessons and elements
Global Wind Organisation / www.globalwindsafety.org
395 / 396
Made with FlippingBook - PDF hosting