3. HOW TO OPERATE CAUTION! When moving the instrument from a warm environment into a cool environment, moisture may accumulate on the Laser Beam Window 1 . Allow the instrument to adapt to the new environment first. DO NOT turn on a wet or damp instrument. To wipe the Laser Beam Window 1 , use ONLY a lint-free cloth. DO NOT USE A PAPER TOWEL. PLEASE NOTE: Laser beam expands as the distance between the instrument and the target increases. Therefore, always take measurements in the center of the laser line. Installing the Batteries Before installing or replacing the batteries, make sure that the Pendulum Switch 2 is in the LOCK position, and the power is turned OFF. 1. Open the Battery Compartment Cover 7 by pushing the latch 6 and lifting it. 2. Insert the batteries observing the polarity. Ensure that the removal band is positioned under the batteries. 3. Close the Battery Compartment Cover 7 until it engages.
Specifications Laser Beam Function
1 Vertical / 1 Horizontal Cross-Lines
Working Range* Laser Beam Color
Up to 10m
Green
Laser Type Accuracy*
Emission Wave Length of 510 ~ 530 nm, Class 2, <1 mW
±8mm @ 9m
Self-Leveling Range Operating Temperature
± 4°
-10 °C ~ +50 °C
Power Source Operating Time
3 x AA alkaline or rechargeable batteries
17 hr
a) QuickSet ® mount b) 6.35mm - 20 thread
Mounting Options
Instrument Dimensions (L x W x H)
94 x 58 x 86mm
Instrument Weight (without batteries)
0,3 kg
Bracket Clamp Capacity
6mm - 60mm
* Measuring accuracy and working range are dependent on lighting conditions of the work environment.
12
13
Made with FlippingBook - professional solution for displaying marketing and sales documents online