0 M
L W H
L 0 M W 2.4 M
L W 0 M W 2.4 M 3.3 M
H
H
H
H
L
L
L
W
W
W
+ 0.0°
+ 0.0°
+ 90.0°
7. After the new measurement is taken, the Height Active Measurement, corresponding Icon Arrow and Labels will briefly flash yellow, then turn white. The third edge of the Volume cuboid is now defined. At the bottom of the screen, the Volume value will appear, briefly flash yellow, then turn white. The Save Arrow (Green, right-facing arrow) will also appear. 8. To save the Volume value, press the Right Button 2 . An overlay will appear displaying that the Volume Measurement has been saved and will be available in the Memory Menu.
L W H
2.4 M 3.3 M 47.8 M
+
H
L
W
426.2 M 3
9. To begin measuring a new Volume, press the Action Button 3 . The screen will return to step 2. 10.To add or subtract another Volume Measurement from the current Volume value, press the Up Button 2 to add or the Down Button 2 to subtract and proceed to the Volume Calculator instructions below. To use the Volume Calculator: 1. The previous Volume value will be displayed at the top of the screen. Below this will be the selected mathematical function, either a plus or a minus. This function can be changed at any point by pressing the Up Button 2 or Down Button 2 , whichever is active. Below the function, the Length “L” Measurement and corresponding Icon Arrow will blink until a measurement is taken by laser-marking the desired target, then pressing the Action Button 3 . 2. After the new measurement is taken, the Length Active Measurement, corresponding Icon Arrow and Labels will briefly flash yellow, then turn white. 3. Now the Width “W” Active Measurement and corresponding Icon Arrow will blink until a measurement is taken by laser-marking the desired target, then pressing the
23
Made with FlippingBook - professional solution for displaying marketing and sales documents online