To enter Circle Area Measurement Mode: 1. Press the Menu Button 5 . The Main Menu will be displayed. 2. Use the Up Button or Down Button 2 to highlight the Mode option. 3. Select the Mode option by pressing the Action Button 3 or Right Button 2 . 4. Use the Up Button or Down Button 2 to highlight the Circle Area option. 5. Select the Circle Area Measurement Mode by pressing the Action Button 3 or Right Button 2 .
MODE BLUETOOTH UNITS ZERO POINT BRIGHTNESS SOUND LANGUAGE MEMORY
TRAPEZOID (1) TRAPEZOID (2)
CIRC. AREA CYLINDER VOLUME LEVEL
D
To use Circle Area Measurement Mode: 1. The Circle Area Measurement Mode will be displayed on the screen and the laser will be armed as indicated by the Laser ON Indicator 7 . 2. The Diameter Measurement and corresponding Icon Arrow will blink until a measurement is taken by laser-marking the desired target, then pressing the Action Button 3 .
0 M
2.13 M
3. After the new measurement is taken, the Diameter Measurement and
corresponding Icon Arrow will briefly flash yellow, then turn white. At the bottom of the screen, the Circle Area value will appear, briefly flash yellow, then turn white. The Save Arrow (Green, right-facing arrow) will also appear.
2.13 M
2.13 M
2.13 M
4.31 M 2
4.31 M 2
4.31 M 2
4. To save the Circle Area value, press the Right Button 2 . An overlay will appear displaying that the Circular Area Measurement has been saved and will be available in the Memory Menu.
34
Made with FlippingBook - professional solution for displaying marketing and sales documents online