3. After the new measurement is taken, the Diameter Measurement and corresponding Icon Arrow will briefly flash yellow, then turn white. 4. The Height Measurement and corresponding Icon Arrow will blink until a measurement is taken by laser-marking the desired target, then pressing the Action Button 3 .
2.13 M 0 M
2.13 M
2.13 M 3.65 M
5. After the new measurement is taken, the Height Measurement and corresponding Icon Arrow will briefly flash yellow, then turn white. At the bottom of the screen, the Cylinder Volume value will appear, briefly flash yellow, then turn white. The Save Arrow (Green, right-facing arrow) will also appear.
H D 2.13 M
D H
2.13 M 3.65 M
2.13 M 3.65 M
3.65 M
D
D
H
H
17 M 3
17 M 3
17 M 3
6. To save the Cylinder Volume value, press the Right Button. An overlay will appear displaying that the Cylinder Volume Measurement has been saved and will be available in the Memory Menu.
2.13 M 3.65 M
17 M 3
7. To take additional measurements, press the Action Button 3 . The Diameter Measurement will be zeroed and blink and the other values will be cleared; then return to step 2. LEVEL MEASUREMENT This mode allows the user to take Linear and Bull’s-eye Level Measurements. To enter Level Measurement Mode: 1. Press the Menu Button 5 . The Main Menu will be displayed. 2. Use the Up Button or Down Button 2 to highlight the Mode option.
36
Made with FlippingBook - professional solution for displaying marketing and sales documents online